753586
33
Zoom out
Zoom in
Previous page
1/40
Next page
CONGA 1090 | 33
ENGLESK
Scrubbing mode
Attach the mop cloth to the water tank and ll the tank with water.
Take the dust tank out.
Install the water tank in the robot and turn it on.
Fig. 28
Use the remote control to select the desired scrubbing power level: High,
Medium or Low.
Once the scrubbing mode is selected from the remote control or the app,
the device will perform the function “All in Oneto vacuum, mop and scrub
at the same time thanks to its mixed tank.
Note: If you want to sweep the oor, skip the water-lling step.
To ensure perfect scrubbing from the start, it is suggested to dampen the
mop cloth evenly with water before use.
Spot mode
The robot will carry out an intense cleaning of a specic area when this
mode is activated. The robot will start cleaning at a specic point and will
move outwards performing spiral movements (1 meter). Then, it will return
to the starting point in spiral movements again.
Before operating the robot with spot cleaning mode, place it on the spot to
be cleaned.
Press the spot cleaning button on the remote control or on the App.
Fig. 29
Edge mode
When this mode is selected, the robot will clean along walls and around
furniture (table or chair legs, for example).
Press the edge cleaning button on the remote control or on the App.
Fig. 30
Room mode
The robot will carry out a 30-minute cleaning cycle when this mode is ac-
tivated.
Press the room cleaning button on the remote control or on the App.
Fig. 31
To ensure an ecient cleaning of the room, close the door or use the mag-
netic strip (only included with Conga 1099 Connected) to delimit the clean-
ing area.
Suction power level function
Press the power level button on the remote control in order to control the
robot’s suction power during the cleaning process. There are 3 suction
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cecotec Conga 1099 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cecotec Conga 1099 in the language / languages: Danish as an attachment in your email.

The manual is 6,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info