Manual Cateye CC-HB100 (page 9 of 20) (English)

538696

Zoom out

Zoom in

1/20

Mounting Main Unit

Slide the main unit onto the bracket from front until it clicks into position. The contacts will

automatically connect. To remove the unit, pull it off forward while pushing down the lever

(Fig. 15).

Test

Mount the main unit. Spin the wheel to check if the sensor pulse symbol ( ) flashes. If not,

adjust the relative positions of the magnet and sensor following the instructions.

This completes the mounting process.

3. Auto (Automatic Start/Stop) Function

This function enables the main unit to start or stop automatically without operation of the right

button, in which

symbol appears on the screen (Fig. 16).

How to Switch on/off Auto Function

When the Set button is pressed in T, D or A mode, symbol appears and Auto function is

on. To clear this function off, press SET button again and

symbol disappears.

• In this function, it starts/stops by perceiving revolutions of the wheel, so it stops measuring

the elapsed time when the wheel ceases moving.

• While this function is on, 2 seconds may be elapsed at the moment when the main unit is

mounted onto the bracket.

• When using this unit as an independent heart rate monitor apart from bicycle, switch off

this function. Operation of the right (Start/Stop) button is needed.

4. Power Saving Function

When the main unit is left without receiving any signal for about 60 minutes continuously,

power supply is shut down and the unit will be in "sleep" state displaying only

display

(Fig. 17).

By receiving signal from the wheel, or by a press of the right or left button, the unit "wakes

up".

Fig.17

Fig.16

Fig.15

Lever

Slide

Front

can you replace the handlebar holder for larger thicker handlebars Submitted on 28-2-2022 at 21:54
Reply Report abuse
can the handlebar holder be replaced for thicker handlebars
Submitted on 28-2-2022 at 21:52
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-HB100 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Cateye CC-HB100 Manual

Product: