538696
7
Zoom out
Zoom in
Previous page
1/20
Next page
E
7
How to Use as a Cyclocomputer
1. Main Unit Preparation
The following must be completed before operation.
-1.How to Measure Wheel Circumference
In order to get the accurate value, measure the wheel circumference (L) actually from the
tire of your bicycle (Fig.3). Put a mark on the tire tread, and ride one full wheel revolution;
then mark the ground at the end of one revolution and measure the distance between the
two marks. Or, "Setting Values Cross Reference Table" (page 19) can tell you the approxi-
mate wheel circumference according to the tire size.
-2.Setting Speed Scale
First, press the AC button; all displays illuminate and then "km/h" symbol appears. With
each press of the right button, "km/h" and "mile/h" appears alternately. Select the desired
scale and press the Set button to fix the scale.
-3.Setting Wheel Circumference
The preset value of this cyclocomputer is 2155mm (standard value for 700 x 32C wheel)
(Fig. 5). When using 2155mm without revision, press Set button and this value is set. For
revision, press the right button to increase the number and the left button to decrease, when
the number is blinking. To increase/decrease the number rapidly, hold down the button.
When the desired number appears, press the Set button and the value is set.
-4.How to Reset or Change Wheel Circumference
Get the stop state in O display, and press the Set button. The stored number flickers. Then
revise the number according to the above.
Setting Clock Time
Hold down the left button for about 2 seconds. Get the stop state by the press of right button.
Then press the Set button; the digits for hours flicker. With each press of the right button, the
digits increase by one. (To increase rapidly, hold down the button.) Then, press the left button
and the digits for minutes flicker. After having increased the digits to the desired number, press
the Set button, and the time is set. For accurate time setting, display the number which is 1
minute ahead of the present time; then at the tone of the time signal, press the Set button.
L
Fig.3
Fig.4
Fig.5
Fig.6
7


Need help? Post your question in this forum.

Forumrules
1

Forum

cateye-cc-hb100

Reset search

  • can you replace the handlebar holder for larger thicker handlebars Submitted on 28-2-2022 at 21:54

    Reply Report abuse
  • can the handlebar holder be replaced for thicker handlebars
    Submitted on 28-2-2022 at 21:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cateye CC-HB100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cateye CC-HB100 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info