649081
25
Zoom out
Zoom in
Previous page
1/26
Next page
688212 nl en ma 2016
25
ENGLISH
8. Close the door, the oven will turn back to Ready Mode. If press button during setting process,
the oven turn to Door Open Mode.
The program that not saved will be lost. If there is program saved as memory procedure, press the
related number button, the saved program will start. If no saved program, the buzzer will alarm when
pressing number button and it will not work.
Note:
1. If the electricity is cut off, the saved program will not lost.
2. If the program need to reset, just repeat the above steps.
3. If press
at the last step, it will turn back to Door Open Mode. The setting will be no use.
12. Double Quantity cooking
1. Under ready state, press "X2" button and then press number buttons 0-9 in 5 seconds, the oven will
start cooking with the quantity preset cooking time.
2. Press "X2", "DOUBLE" displays. When press number buttons, LED will display the quantity preset time.
For example, number button "5" and its preset time is 1 minute. Then press "X2", then time will change
to 1:00*(1+0.8)=1:48
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
13. Stage Cooking Programming
1. This allows the user to cook food items at combination of various Power Levels.
2. Three stages can be set at most under cooking mode or memory mode. After setting the power and time
for the first stage, press
to set the second stage. And the same step to set the third stage.
3. When setting the second or the third stage, press
, "STAGE-2" or "STAGE-3" displays.
4. Press
button to start cooking.
14. Use Option Mode
1. Open the oven door and press "2" for 5 seconds. The buzzer sounds once and enter this mode.
2. LED displays "OP:
−−".
3. Press any number button to enter related mode setting. For example: to set the voice of the buzzer to
medium. Press "2", "OP:22" displays. If you want to change, keep pressing "2",
LED displays "OP:20", "OP:21", "OP:22", "OP:23", "OP:20" .....in cycle.
4. Press
to save the current setting. After saved, "OP:−−" display again.
5. During setting process, press
to enter Door Open Mode. Close the door will enter Ready
Mode.
6. If
button not pressed at the last step, the program cannot be saved but stay at previous way.
15. Service Mode
7. Open the oven door and press "3" for 5 seconds to enter service mode.
8. LED displays "SERVICE".
9. To check the times of closing or opening the door, just press number button "3",
LED will display the times.
10. Press number button "4" in, "4-CLEAR" displays. Press
and "CLEARED" displays,
the message will be cancelled.
11. Press
to enter Door Open Mode. Close the door will enter Ready Mode.
16. Factory-default setting
1. In power up and ready mode, press
and "0" to factory - default setting.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caterchef 688.212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caterchef 688.212 in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info