649081
24
Zoom out
Zoom in
Previous page
1/26
Next page
688212 nl en ma 2016
24
ENGLISH
7. Manual Cook Mode
1. Pressing the
pad will cause to the oven to begin Manual Cook Mode.
2. During this mode, remaining cooking time displays. The fan and oven lamp will work.
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
If you press
button under this mode, the oven will enter Pause Mode.
8. End of Cook Cycle Mode
1. After the time has expired in a Manual Cook Mode, or a Preset Program Cook Mode,
the oven shall go into The End of Cook Cycle Mode.
2. During this mode, "DONE" displays.
3. If either User Option OP:11 or "OP:12" is selected, the oven shall continue to sound until the user ac-
knowledges this by either opening and then closing the door or pressing the
pad.
If User Option OP:10 is selected, after the 3 seconds beep, the oven shall go into Idle Mode.
9. Preset Program Cook Mode
1. This mode allows cooking of food items through a one pad touch operation.
While in Ready Mode, pressing one of ten digit keys on the keyboard will cause the oven to run the
Preset Program associated with that key.
2. The oven displays the remaining cooking time. If it is multi-stage cooking, the total remaining cooking
time displays not a particular stage cooking time.
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
4. If you press
button under this mode, the oven will enter Pause Mode.
10. On the Fly Cooking
1. While the oven is cooking or under Pause Mode, if User Option OP:51 is selected press number buttons,
the preset cooking program will start automatically.
2. LED displays the remaining cooking time.
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
If you press
button under this mode, the oven will enter Pause Mode.
11. Programming Mode
This mode allows the user to assign cook times and power levels to the once touch button.
1. Open the door and press "1" for 5 seconds, the buzzer will sound once and enter to Programming
Mode.
2. "PROGRAM" displays.
3. Press any number ,0 to 9,and the LED will display the saved time, then you can input the time you need.
4. Press
, , or to input the power level. LED will display the related power.
If the same button pressed twice, the power will change to PL10. If no power chosen, "PL10" is default.
5. To change the cooking factors: If press "X2",LED will display "CF:XX". The default factor is 80%.
"CF:80" displays. If you need to change the cooking power, just press one of the number buttons to set.
6. After setting the time and power, press
in 30s, the cooking program will be saved.
When the program saved, "PROGRAM" displays.
7. If all the cooking time exceeds the MAX.time User Option 7, when press
to save the program,
the buzzer will sound three times briefly to tell you the time is no use.
And then LED turn back to show "PROGRAM". The time set before will be no change.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Caterchef 688.212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Caterchef 688.212 in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info