740611

Cata CM 760 AS Manual

43
Zoom out
Zoom in
Previous page
1/110
Next page
4)
At the completion of the set duration, the timer will stop
the oven and give an audible warning. Also, the symbol
”A” will begin to fl ash on the screen. After bringing the cooking
function and oven temperature knob to “0” position. Pressing
any button less than 3 seconds, it will stop the audible warning.
Pressing ” “ for more than 3 seconds set the oven to Manual
mode again to use the oven.
Full-automatic programming:
This function is used to cook after a certain period of time, with
a certain duration. The food to be cooked is put into the oven.
The oven is adjusted to the desired cooking function. The oven
temperature is adjusted to the desired degree depending on
the food to be cooked.
First: Press ”
“ button until you see “Dur“ on the timer
screen. Use “+” “-“ button to adjust cooking period for the food
you wish to cook. Press ”
“ button to confi rm, the day‘s time
will appear on the screen and the symbols “A“ will begin to
continuously light on the screen.
Second: keep pressing on ” “ button until you see “End” on
the timer screen. When you see “End” on the timer screen,
Use “+” “-“ button to adjust fi nishing time, Press ”
“ button
to confi rm, the day‘s time will appear on the screen and the
symbol “A” will begin to continuously light on the screen. The
symbol ” “ disappears until the time cooking starts.
You can set a time which can be up 23.59 hours after the time
obtained by adding the cooking period to the day’s time.
The oven will start operating at the time calculated by
deducting the cooking period from the set fi nishing time, and
will stop at the set fi nishing time. The timer will give an audible
warning and the symbol “A” will begin to fl ash. After bringing
the cooking function and oven temperature any button less
than 3 seconds, it will stop the audible warning.
Pressing ”
“ for more than 3 seconds set the oven to Manual
mode again to use the oven.
Please note:Once setting full-automatic mode, all the time
can not be changed. Change time means cancle automatice
progamme and enter into corresponding mode. If you need to
reset automatic mode, need to stop setting the current mode,
to set the automatice mode according to the above steps again.
Spectifi cation
1) Long press on ”+” or “-” for more than 3 seconds, the date
will progressively and rapidly increase or decrease in the
rate of 5 seconds.
2) When setting each of the time function, if there is none
operation for 5 minutes then it will return to manual mode.
3)
When setting each of the time function, pressing on ” “ for more
than 3 seconds can cancel current setting and enter manual mode.
4) During time function setting, pressing on “+”and ” “ for
more than 3 seconds, a beep sounds it can cancle the curent
time function setting and enter standby mode.
5) We suggest that you run the oven elements for 15 minutes
at 200 degrees to burn off any residuce from their surfaces.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cata CM 760 AS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cata CM 760 AS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info