740611

Cata CM 760 AS Manual

42
Zoom out
Zoom in
Previous page
1/110
Next page
OPERATION INSTRUCTIONS
When the oven is fi rst connected to the electrical supply, wait
for the display automatically show “12.30”, a beep sound once
and the “.” fl ash. Ensure the correct time of the day is set
before using the oven.
please note: that is 24 hour clock, for example 2PM shown as
14.00.
To set the correct time of day
1) Press “+” “-” button to adjust the hour setting.
2) Press ”
“ to confi rm the hour setting.
3) Press”+” “-” button to adjust the minute setting.
4) Press ”
“ to confi rm the minute setting and the timer will
be in standby mode.
Note: If the display does not fl ash, adjust the time of day by
pressing the”+” and ”-” buttons at the same time for more than
3 seconds.
Oven On and Off
If the timer is in standby mode, press ”
“ for more than
3 seconds, the timer will enter manual mode and the symbol
” “ will light up continuously.
1) Set the desired cooking function and the temperature
degree.
2) Set the time function, then the oven will on.
If you set Dur or End, after cooking, the oven will automatically
turn off.
If you set manual or minute minder, after cooking, bring the
cooking function and oven temperature
knob to “0” position. Press ” “and “+” buttons for more than
3 seconds to return to standby mode.
Time function setting
In manual mode, pressing ”
“ can enter the time function
setting, the sequence of the function setting is Manual mode
Minute minder-Dur-End-Manual mode. Then selected cooking
function and ajust the cook temperature if required.
Manual mode:
In manual mode, only the day’s time and the symbol ” “ lights
up. The cooking duration has to be controlled by the user.
Notes: In manual mode, to ensure the oven is not left on
accidentally,after 5 hours no any button pressed, the timer will
fl ash once a second to warn you the oven will enter standby
mode. After a total of 10 hours, the timer will enter standby
mode.
When the timer is fl ashing in manual mode, press any button
to reset the timer if you intend to continue using the oven. Or
press ”
“ and ”+” together for more than 3 seconds to enter
standby mode if oven will not be used.
Audible warning time adjustment:
This function can be used to receive audible warning at the
completion of the ajusted time period.
1>Press ”
“ button to select the minute minder function. The
relevant ”
“ “.” symbol will fl ash.
2>Use “+” “-“ button to adjust minute minder. (Refer to
the instructions for setting the correct time of day.) Press
”
“ button to confi rm, the ” “ symbol will begin to
light continuously. When the ” “symbol begins to light
continuously, the audible warning time adjustment is done.
3>When the time is up, the timer gives an audible warning
and the ” “ symbol begins to fl ash on the screen. Press any
button less than 3 seconds, it will stop the audible warning and
the ” “ symbol disappears on the screen. Audible warning
time adjustment is for warning purposes only.
Press ”
“ and “+” together for more than 3 seconds to enter
standby mode if oven will not be used.
Semi-automatic programming according to cooking period:
This function is used to cook in the desired time range, The
food to be cooked are put into the oven.
The oven is adjustment to the desired cooking function and
temperature degree.
The maximum setting of cooking period is 10 hours.
1) Press ” “ button until you see “Dur“ on the timer screen.
(Before setting cooking period.)
2) Use “+” “-“ button to adjust cooking period for the food you
wish to cook. (Refer to the instructions for setting the correct
time of day.) Press ”
“ button to confi rm, the day’s time will
appear on the screen and the symbols “A” ” “ will light
on the screen. While doing this, the oven will also start to
operate.
3) At the completion of the set duration, the timer will stop
the oven and give an audible warning. Also, the symbol
”A” will begin to fl ash on the screen. After bringing the
cooking function and oven temperature knob to “0” position.
Pressing any button less than 3 seconds, it will stop the
audible warning.
Pressing ”
“ for more than 3 seconds set the oven to Manual
mode again to use the oven.
Semi-automatic programming accroding to fi nishing time:
This function is used to cook according to the desired fi nishing
time. The food to be cooked is put into the oven.The oven is
adjusted to the desired cooking function and temperature
degree.
1) Press ” “ button until you see “End“ on the timer screen.
(Before setting fi nished time).
2) Use “+” “-“ button to adjust fi nishing time. (Refer to the
instructions for setting the correct time of day.)
3) Press ”
“ button to confi rm, the day ‘s time will appear
on the screen and the symbols “A” ” “ will light on the
screen. While doing this, the oven will also start to operate.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cata CM 760 AS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cata CM 760 AS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info