25
• Swipe left/right to view the previous/next file.
• Tap to play a video.
• Tap to edit a photo. You can add, remove, or change Spot Meters or Regions of Interest; you can adjust
the image blending options; or you can change the colour palette. When complete, tap to save changes.
• Tap to share the selected file via various apps available on your device.
• Tap to delete the selected file. Tap OK to confirm deletion.
• Tap to view information about the recorded file, including the date, time, colour palette, temperature,
emissivity and location (if Save Location setting is enabled).
• Tap to generate a PDF report of the selected image.
TUNING
The camera has a mechanical shutter inside that periodically activates and allows the thermal camera to do a
calibration or image refresh. When the shutter activates, the image will freeze for a brief period. You can also
manually trigger this by tapping .
The purpose of the shutter is to allow the camera to provide an improved image. The Cat S62 Pro performs the
tuning operation automatically on a periodic basis. Note that when the Spot Meter is turned on, the tuning will
occur more often.
MEASURING TEMPERATURE WITH SPOT METERS
Use the Spot Meter to measure surface temperatures, either on a saved thermal image or from the live
thermal camera feed.
1. Tap , and then the same icon again from the sub menu that appears below.
2. A Spot Meter appears on the display and gives a temperature reading.
3. Tap and drag the Spot Meter to another point. You can add up to three Spot Meters.
4. Tap and hold over a Spot Meter to delete it.
FROM A PREVIOUSLY CAPTURED IMAGE:
1. When viewing a previously captured image, tap the Spot Meter icon , and then the same icon again
from the sub menu.
2. A Spot Meter appears on the display. Tap and drag it to your chosen position.
3. You can add up to three Spot Meters. Tap and hold over a Spot Meter to delete it.
NOTE:
