586845
21
Zoom out
Zoom in
Previous page
1/24
Next page
EN-19
English
Reference
Troubleshooting
Problem Cause Required Action Reference
No sound is produced
when I tap a pad.
1. VOLUME knob is at the minimum
setting.
1. Rotate the VOLUME knob to the
right.
) EN-11
2. MIX FADER is set to the EXT side. 2. Move MIX FADER to the right. ) EN-11
3. There is an effect assigned to the pad
you are tapping.
3. Tap another pad or change the
current pad’s tone.
) EN-15
When connected to a
computer, I can’t send or
receive data.
1. Check of the USB cable between
TRACKFORMER and the computer is
connected correctly, and that the
correct device is selected with the
computer’s music software setup.
) EN-18
2. Try turning off TRACKFORMER and
shutting down your computer’s music
software. Next, turn TRACKFORMER
back on and restart your computer’s
music software.
) EN-18
Sounds and/or effects are
not what I want. Turning
TRACKFORMER off and
then back on again does
not resolve the problem.
The AUTO RESUME setting is enabled. For information about how to change the
AUTO RESUME setting, see the
separate User’s Guide (Tutorial).
Output volume does not
change no matter how
strongly I tap a pad.
The VELOCITY setting is enabled. For information about how to change the
VELOCITY setting, see the separate
User’s Guide (Tutorial).
Sequence data does not
play when I press the
PLAY button.
There is no sequence data stored in the
sequence data file whose number you
specified.
Assign sounds to the sequence step
keys to create a sequence.
) EN-12
A displayed setting value
keeps changing.
The VALUE knob is being used. Return the VALUE knob to its 12 o’clock
position.
) EN-10
External input does not
sound.
Volume level adjustment is not correct. Check the player side volume level
setting.
If you are using a microphone, adjust the
MIC VOLUME knob setting.
Move MIX FADER to the left of center.
) EN-7
) EN-17
Pads and/or sequence step
keys are not performing
the operations they
should.
There is an ongoing FUNCTION,
SAMPLING, or other setting screen
operation being performed.
Press the
EXIT button to return
TRACKFORMER to its power on state.
) EN-6
Sounds don’t stop. 1. HOLD is enabled. 1. Press the HOLD button so it becomes
unlit (which disables HOLD), or tap
the currently lit pad one more time.
) EN-6
2. Pads are in the TOGGLE mode. 2. Tap the currently lit pad one more
time. If the TOGGLE mode is enabled
for that pad, its sound will be
sustained. Use PAD ACTION to
change the TOGGLE mode setting to
Momentary. For information about
how to change the setting, see the
separate “User’s Guide (Tutorial)”.
XWPD1-ES-1A.indd 21 2014/12/25 11:44:36
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XW-PD1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XW-PD1 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XW-PD1

Casio XW-PD1 User Manual - German - 24 pages

Casio XW-PD1 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info