586845
19
Zoom out
Zoom in
Previous page
1/24
Next page
EN-17
English
Working with an External Sound Source
You can connect a smartphone or other music player to
TRACKFORMER and apply effects to the external
sound source. You can also connect a microphone to
TRACKFORMER and use it as a microphone effector.
Use MIX FADER to adjust the balance between the
external sound source and the internal sound source
(sequence). The external and internal sound sources are
at the same volume when the fader is in the center
position.
The filter effect is assigned to pad 13 in bank 1 of
sequence data file 000. The procedure below shows
how to apply the filter effect to an external sound
source by pressing pad 13.
1.
Play back from an external sound source
(page EN-11).
2.
While holding down the SEQ selector button,
use the 11 () and 12 (+) buttons to select
sequence data file number 000.
3.
After pressing the BANK selector button,
press sequence step key 1 to select bank 1.
4.
Press pad 13.
The filter effect is applied to the external sound source
while the pad is depressed.
If you want the effect to be applied continually, press
the HOLD selector button and then press pad 13.
A simple operation changes the effect assigned to pad
13. For more information, see “Changing the Tone of
a Particular Pad” (page EN-15).
NOTE
Various effects are assigned to pads 14 through 16 in
bank 1 of sequence data file 000 as well. You can
apply multiple effects by pressing more than one
pad at the same time.
While an effect is being applied, you can rotate the FX1
and FX2 knobs to adjust the intensity. The parameters
controlled by each of the knobs depend on the effect
being applied. For more information, refer to the
separate User’s Guide (Tutorial).
Use this procedure to slice part of an external sound
source and repeat play it.
Audio Slicing Schematic
1.
Play back from an external sound source
(page EN-11).
2.
Press the SLICE selector button.
Sequence step keys light in numeric sequence. The
sound that plays while a sequence step key is lit is the
sound assigned to the sequence step key.
The recorded sound is updated each time a sequence
step key lights.
Adjusting Volume
Applying Effects
External sound source: Max
Internal sound source: Min
Min
Max
Adjusting the Intensity of the
Effect
Slicing Audio
1 2 3 4 5 12 13 14 15 16
12345 121212
External input
Output from
speaker
Step
Present
Repeat playback of
step 1 and step 2
Time
Step
XWPD1-ES-1A.indd 19 2014/12/25 11:44:36
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio XW-PD1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio XW-PD1 in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio XW-PD1

Casio XW-PD1 User Manual - German - 24 pages

Casio XW-PD1 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info