586842
45
Zoom out
Zoom in
Previous page
1/96
Next page
E-43
Channels CH 11 through CH 16 of the level meter show which
tracks already contain recorded data. See Level Meter Dur-
ing Record Operations on page E-44 for details on how to
read the level meter.
4.
Make any tone setting you want.
5.
Press the ENTER button to enter the Punch-in Mode.
6.
Press the START/STOP button to start playback of the
song in the user song area you selected in step 2.
7.
When playback reaches the part you want to change,
play the new part on the keyboard.
Playback from memory stops and recording begins as soon
as you play something on the keyboard.
You can change the rhythm setting while recording is in
progress.
Continue playing until the end of the song.
You can also change Auto Accompaniment chords during
punch-in recording by playing chords on the accompaniment
keyboard.
If a synchro start operation is already recorded in Track 1,
playing something on the accompaniment keyboard starts
rhythm play and records it.
See Synchro Starting Accompaniment with Rhythm Play
on page E-25 or details on using synchro start.
8.
After you are finished, press START/STOP to stop re-
cording.
The REC indicator disappears from the display when record-
ing is stopped.
After recording is stopped, you can press the START/STOP
button to playback what you have just recorded. See Play-
ing Back from Song Sequencer Memory on page E-45 for
details on the type of data recorded to Song Sequencer mem-
ory.
TR1
CH 11
TR2
CH 12
TR3
CH 13
TR4
CH 14
TR5
CH 15
TR6
CH 16
733A-E-045A
To use punch-in recording in Tracks 2 through 6
NOTE
If you are performing punch-in recording in Tracks 2 through 6 immediate-
ly after you finished punch-in recording in Track 1, skip steps 1 and 2 of
the following procedure.
1.
Press the SONG button once.
This causes the indicator lamp above the SONG button to
light.
2.
Select the user song area that contains the song whose
contents you want to change using punch-in record-
ing.
Use [+] and [] to select User Song Area 0 (SG0) or User Song
Area 1 (SG1).
3.
Press the RECORD button to enter record standby.
The REC indicator appears, and the frame around the CH11
(Track 1) flashes on the display.
Channels CH 11 through CH 16 of the level meter show which
tracks already contain recorded data. See Level Meter Dur-
ing Record Operations on page E-44 for details on how to
read the level meter.
4.
Select the track whose contents you want to change.
Use CHANNEL buttons CH12 (Track 2) through CH16 (Track
6) to select the track you want.
5.
Make any tone setting you want.
6.
Press the ENTER button to enter the Punch-in Mode.
Pressing the ENTER button again exits the Punch-in Mode.
7.
Press the START/STOP button to start playback of the
song in the user song area you selected in step 2.
8.
When playback reaches the part you want to change,
play the new part on the keyboard.
Playback of the current track stops and punch-in recording
starts as soon as you play something on the keyboard.
Pressing the ENTER button instead of playing something on
the keyboard starts recording of a blank in the selected track
(except for the accompaniment of Track 1) until you play
something.
Continue playing until the end of the song.
WK-1800/1600(E)-39~47 03.7.31, 5:21 PMPage 43 Adobe PageMaker 6.5J/PPC
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio WK-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio WK-1800 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info