586842
43
Zoom out
Zoom in
Previous page
1/96
Next page
E-41
733A-E-043A
7.
After you are finished playing, press START/STOP
again to stop recording.
The REC indicator clears from the display when recording is
stopped.
Pressing START/STOP again at this point plays back the song
that you just finished recording. See Playing Back from Song
Sequencer Memory on page E-45 for details on song play-
back.
NOTES
Real-time recording to a track that already contains data replaces the
previous recording with the new one.
If you make a mistake while recording, you can either record over again
from step 1, or you can use punch-in recording (page E-42) to correct
them.
If you change the rhythm pattern part way through real-time recording,
the meter value indicated on the display remains unchanged, even if
the new rhythm has a different meter.
Track 1 Real-time Recording Variations
The following describes a number of different variations you can use
when recording to Track 1 using real-time recording. All of these vari-
ations are based upon the procedure described under To use real-
time recording in Track 1 on this page.
To record without rhythm
Skip step 5. Real-time recording without a rhythm starts when you
press a keyboard key.
To start recording with synchro start
In place of step 5, press the SYNCHRO/ENDING button. Auto-accom-
paniment and recording will both start when you play a chord on the
accompaniment keyboard.
To record using an intro, ending, or fill-in
During recording, the INTRO, SYNCHRO/ENDING, NORMAL/
FILL-IN, and VARIATION/FILL-IN buttons (page E-24 to 25) can all
be used to perform their normal operation.
To synchro start Auto Accompaniment with an intro
pattern
In place of step 5, press the SYNCHRO/ENDING button and then
the INTRO button. Auto Accompaniment will start with the intro
pattern when you play a chord on the accompaniment keyboard.
To start Auto Accompaniment part way into a record-
ing
In place of step 5, press the SYNCHRO/ENDING button and then
start playing on the melody keyboard to start recording without ac-
companiment. When you reach the point where you want accompa-
niment to start, play a chord on the accompaniment keyboard to start
Auto Accompaniment.
NOTES
You can change the tone and rhythm while recording is in progress. Any
changes you make become part of the recorded data.
The tempo you use for recording does not affect the tempo of the play-
back. This means you can record at a very slow tempo for easy play,
and then speed up the tempo for playback.
If you are using a rhythm pattern, notes are recorded using the meter
(time) of the rhythm pattern. If you are not using a rhythm pattern, you
must set the meter yourself using the procedure under Meter (3) on
page E-46.
The following procedure shows the most basic operations for real-time
recording to Track 1. For other variations, see Track 1 Real-time Re-
cording Variations on this page.
To use real-time recording in Track 1
1.
Press the SONG button once.
This causes the indicator lamp above the SONG button to
light.
2.
Select the user song area to which you want to record.
Use [+] and [] to select User Song Area 0 (SG0) or User Song
Area 1 (SG1).
Change Mixer settings (CH1) if you want. The Mixer settings
you make for CH1 are copied to Track 1 during recording.
3.
Press the RECORD button to enter record standby.
The REC indicator and the frame around the CH11 (Track 1)
flashes on the display.
Track 1 (CH11) is automatically selected as the record track
whenever you enter record standby.
Channels CH 11 through CH 16 of the level meter show which
tracks already contain recorded data. See Level Meter Dur-
ing Record Operations on page E-44 for details on how to
read the level meter.
4.
Make any tone, rhythm, or accompaniment mode set-
ting you want.
5.
Press the START/STOP button to start recording.
At this time the REC indicator stops flashing.
The metronome normally sounds during recording. If you
want to turn off the metronome, use the procedure under
Metronome Setting (1) on page E-46.
6.
Play the notes you want to record on the keyboard.
Chords played on the accompaniment keyboard in accor-
dance with the accompaniment method selected with the
MODE button are also recorded in Track 1.
PITCH BEND Wheel and pedal operations are also record-
ed. See Real-time RecordingAll Tracks on page E-39 for
details.
WK-1800/1600(E)-39~47 03.7.31, 5:21 PMPage 41 Adobe PageMaker 6.5J/PPC
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio WK-1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio WK-1800 in the language / languages: English as an attachment in your email.

The manual is 5,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info