288831
26
Zoom out
Zoom in
Previous page
1/32
Next page
101
Connecting to a Personal Computer
PC Link Software
Special PC Link software available from CASIO makes im-
age data transfers with a personal computer quick and easy.
The software is also designed to minimize loss of image
quality due to data transfer.
For details on how to connect to a personal computer and
exchange data, see the documentation that comes with the
PC Link software.
LK-12S for Windows
LK-22S for Windows and Macintosh
IMPORTANT!
• This camera does not fully support the software that
comes with the LK-1, LK-1A, LK-10V, LK-11 connec-
tion kits for Windows, and the LK-2, LK-2A, LK-2V,
LK-21 connection kits for the Macintosh. Never try to
use the software that comes with these connections
kits with this camera.
• When you download files from your computer to the
camera (using the Send To Camera or Send Files
pull-down menu command), the following message
appears on your computer screen: “are converted to
the CAM format”. This message does not apply to im-
ages downloaded to the QV-7000SX, and images are
transferred in JPEG format.
CONNECTING TO OTHER EQUIPMENT
102
INFRARED DATA TRANSFER
INFRARED DATA TRANSFER
This camera can perform IrDA data communication with digi-
tal equipment that supports IrTran-P protocol.
Infrared data transfer capabilities let you exchange image
data with another digital camera without physical connection.
This camera uses IrDA IrTran-P protocol, which was jointly
developed by NTT, Sony, Sharp, Okaya Systemware and
CASIO to provide a means for transferring digital camera
still images using infrared signals. (January 1998)
IMPORTANT!
• IrTran-P communication can be performed only with
equipment that supports IrTran-P protocol.
During IrTran-P image data transfers, the ID (product
identification string) of the other equipment is shown
on the camera’s monitor screen. The ID normally
shows the manufacturer and product name, but no ID
may appear at all, depending on how the equipment
was set up by the manufacturer.
• When performing IrTran-P data communication with
another QV-7000SX camera, images are transferred
as-is, without any change in size (1280 x 960 or 640 x
480 pixels).
When using IrTran-P data communication to send im-
age data to a CASIO QV-770 digital camera, QV-
7000SX 1280 x 960 images are converted to 640 x
480 images.
• How images are affected by IrTran-P transfers with
other equipment depends on the other equipment.
Receiving Data
To Setup to Receive
BUTTON OPERATION
1.
Slide the Function Switch to PLAY.
2.
Press .
This causes the receive
standby screen to appear.
3.
Align the infrared port of the camera with the
port of the sending unit, and start the send op-
eration.
See the documentation that comes with the sending
unit for details on its operation.
103
INFRARED DATA TRANSFER
MENU BUTTON OPERATION
1.
Slide the Function Switch to PLAY.
2.
Press MENU.
3.
Use [+] and [–] to select
IR, and then press the
shutter button.
4.
Use [+] and [–] to select
IRTRAN-P, and then
press the shutter button.
5.
Use [+] and [–] to select
RECEIVE, and then
press the shutter button.
This causes the receive
standby screen to appear.
6.
Align the infrared port of the camera with the
port of the sending unit, and start the send op-
eration.
See the documentation that comes with the sending
unit for details on its operation.
104
INFRARED DATA TRANSFER
4.
Align the infrared port of the receiving device
that supports IrTran-P protocol.
Position the cameras so they are 10cm to 30cm (3.9"
to 11.8") apart from each other.
To cancel an image data send operation, press
MENU.
Sending Data
Transferring a movie or panorama to another model QV Digi-
tal Camera (other than the QV-7000SX) causes the images
to be ungrouped. Such images cannot be played back on
other CASIO QV Digital Camera Models.
You can send a single specific image, all the images in a
particular folder or all images currently on the memory card.
To Send a Single Image
BUTTON OPERATION
1.
Slide the Function Switch to PLAY.
2.
Use [+] and [–] to select the image you want to
send.
3.
Press .
This causes the send
standby screen to appear.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio qv 7000sx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio qv 7000sx in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info