288825
8
Zoom out
Zoom in
Previous page
1/18
Next page
29
Recording Images
The image number appears in
the upper right corner of the
LCD. It indicates the number of
the next image that will be re-
corded. The number 21, for ex-
ample, indicates that there are
20 images in memory, and the
next image will be number 21.
To clear the image number from the LCD, press the DISP
button again.
Note
Note that turning display of the image number on and off in the
Record Mode also affects the display of the memory page number
in the Playback Mode (page 36), and the zoom area indicator used
in the zoom operation (page 41). If you turn display of the image
number off in the Record Mode, for example, the memory page
number will not be shown in the Playback Mode.
Exposure Warning Indicators
Exposure warning indicators appear on the LCD whenever the light
being picked up by the lens would result in under exposure or over
exposure of an image.
Under exposure
Over exposure
Operation
30
Use the procedure described on page 27 to change the aperture or
change the lighting of the image so the indicator disappears from the
LCD.
Important!
The exposure warning indicators also appear when lighting is out-
side the range of the camera. In such a case, changing the aperture
will not clear the indicator from the LCD.
The manual exposure adjustment procedure (page 26) cannot be
used when an exposure warning indicator is on the LCD. Clear the
warning indicator by changing the aperture switch setting.
Pressing the [+] or [–] button to adjust exposure while an exposure
warning indicator is on the LCD clears the warning indicator and
causes a positive [+] or negative [–] exposure correction (EV shift)
indicator to appear.
Low Battery Indicator
The low battery indicator ( ) appears on the LCD whenever re-
maining battery power drops below a certain level.
When this indicator appears, replace all four batteries with a fresh set
of new ones. Once the low battery indicator appears, you can expect
only about 10 more minutes of operation before total power failure.
See page 13 for details on how to replace batteries.
31
Recording Images
Memory Full Message
The message “MEMORY FULL” appears
on the LCD whenever you press the shut-
ter button while camera memory is full. If
you want to record more images, you must
first delete some of the images already
stored in camera memory. See page 50 for
details on how to delete images.
Using the Self-Timer
With the Self-Timer, the shutter is released 10 seconds after you
press the
/PROTECT button.
1. Enter the Record Mode.
Set the function switch to the REC
position.
2. Start the Self-Timer operation.
Place the camera securely on a tripod, desk or other stable
surface, with the image to be recorded in the LCD.
After composing the image, press
the /PROTECT button.
A 10-second countdown starts on
the LCD. The shutter will release
automatically when the end of the
countdown is reached.
REC
PLAY
Operation
32
To cancel on ongoing Self-Timer
operation, press the
/PRO-
TECT button or shutter button.
Note
If you use the Self-Timer with the lens body rotate 180° (page 23),
you can view the countdown on the LCD while waiting for the shut-
ter to release.
Important!
If battery power is low, camera power may turn off while a count-
down is in progress. If this happens, replace the batteries with new
ones.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio qv 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio qv 30 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info