Manual Casio qv 30 (page 6 of 18) (English)

288825

Zoom out

Zoom in

1/18

Recording Images

4. Record the image.

• Compose the image you want to

record while viewing it on the

LCD.

• It is best to look at the LCD di-

rectly, and not from an angle.

• Take care that your finger is not

blocking the lens.

• Should the lens become dirty, use

the cloth that comes with the cam-

era to clean it off.

• When the image is situated on the

LCD as you want it, press the

shutter button.

• Press the shutter button lightly to avoid moving the camera.

See page 22 for information on how to avoid hand move-

ment.

• The message “WAIT” appears on the LCD for about six sec-

onds along with the image that was recorded when you

pressed the shutter button. You can use the camera to take

the next picture after the “WAIT” message disappears.

• Here you could change the function switch to the PLAY posi-

tion and view the image you just recorded.

Caution

• Never open the battery compartment cover, disconnect the

AC adaptor from the camera or unplug it from the wall

socket while the “WAIT” message is on the LCD. Doing so

will not only make storage of the current image impossible, it

can also corrupt other image data already stored in camera

memory.

MACRO NORMAL

REC

PLAY

Operation

How to avoid hand movement…

Any hand movement when you press the shutter button can causes

blurring of the recorded image. Note the following points on avoiding

hand movement.

• Make sure there is no excessive movement of the image of the ob-

ject on the LCD.

• Use a tripod whenever possible when recording images in dim light-

ing. The camera automatically adjusts shutter speed in accordance

with the brightness of the object whose image is being recorded.

Shutter speed is quite slow for dimly lit objects, increasing the pos-

sibility of blurring caused by hand movement.

Fluorescent Lighting

Fluorescent lighting actually flickers at a frequency that cannot be

detected by the human eye. When using the camera indoors under

such lighting, you may experience some brightness or color problems

with recorded images. The actual extent of the problems depends on

what cycle of the fluorescent light’s flicker is occurring when the

camera’s shutter actually releases. For best results, use a commer-

cially available video lights.

Infrared Light

Infrared light generated by a flash or other source can create image

color problems, such as red areas being recorded as green. Such

color problems will show up in the LCD while you are composing the

image.

Recording Images

Shooting Images Outdoors

Strong direct or reflected sunlight can cause recorded images to take

on a greenish tinge. This is due to the characteristics of the camera’s

optical pickup and it does not indicate malfunction of the camera. One

way you can try to minimize this problem is to set the aperture to [●]

(F8).

Changing the Lens Orientation

The lens of the camera is built into a lens body that is designed to

rotate. This means you can change the angle of the lens without mov-

ing the rest of the camera.

Rotates up to 90

towards the front

Rotates up to 180

towards the back

Operation

• Any images recorded while the lens body is rotated so the lens is

pointed from the back of the camera are stored as mirror images of

the image that appears in the LCD before the shutter button is

pressed.

A LCD when shutter button is

pressed (in the Record Mode)

B LCD when image is played

back from camera memory

Important!

• Do not apply excessive force when rotating the lens body. Doing so

can cause serious damage to the lens.

• Do not carry the camera or move it around while holding onto only

the lens body.

• Return the lens body to its normal position (with the lens pointing

from the front of the camera) before storing the camera.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio qv 30 in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio qv 30 Manual

Product: