466891
16
Zoom out
Zoom in
Previous page
1/70
Next page
E-14
Selecting and Playing a Tone
Splitting the Keyboard between Two
Tones
1.
Use the “Tone List” (page E-57) to look up the
group(s) and numbers of the two tones
(UPPER 1 zone tone and LOWER 1 zone
tone) you want to use.
2.
Check to make sure that the both the 
(LAYER) and  (SPLIT) button lamps are
unlit.
If one or both lamps are lit, press the  (LAYER) and
 (SPLIT) buttons to turn them off.
3.
Press the (UPPER 1) button so its lamp is
lit.
This indicates you can select the UPPER 1 zone tone.
4.
Select the UPPER 1 zone tone.
For details about selecting tones, see “To select a
tone” (page E-11).
5.
Press the  (SPLIT) button so its lamp is lit.
At this time the (UPPER 1) button lamp will go out
and the (LOWER 1) button lamp will light in its
place. This indicates you can select the LOWER 1
zone tone.
6.
Select the LOWER 1 zone tone.
7.
Play something on the left and right sides of
the keyboard to confirm that the tones are
assigned properly.
At any time you can press the (UPPER 1) button to
change the UPPER 1 zone tone or the (LOWER 1)
button to change the LOWER 1 zone tone.
8.
To cancel the keyboard split, press the 
(SPLIT) button again so its lamp goes out.
NOTE
You also can specify the keyboard split point, which
the location where the keyboard splits between the
left range and right range. In initial default split
point is at key F#3.
For details, see “To specify the keyboard split point”
(page E-14).
To specify the keyboard split point
1.
Hold down the  (SPLIT) button until the
screen shown below appears.
2.
Press the keyboard key that you want to be
the leftmost key in the right side (UPPER 1
zone) range.
The name of the key you press will appear on the
display as the new split point key name.
You also can use the  (w, q) buttons to change
the split point key name.
3.
When you are finished, press the  (SPLIT)
button.
LOWER 1 UPPER 1
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PX-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PX-3 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio PX-3

Casio PX-3 User Manual - German - 70 pages

Casio PX-3 User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info