466891
14
Zoom out
Zoom in
Previous page
1/70
Next page
E-12
Selecting and Playing a Tone
5.
Check to make sure that the lamp above the
 (TONE) button is lit.
If it is unlit, press the  (TONE) button to light the
upper lamp.
6.
Use the  to  (Tone Group) buttons to
select the group you want.
The lamp of the button you press will light.
7.
Use the  (w, q) buttons to select the
tone you want. Now you can play on the
keyboard using the tone you selected.
Example: To select the “Jazz Organ 2” tone in the
“ORGAN” group
NOTE
Pressing w and q at the same time selects tone
001 in the currently selected group.
Holding down w or q will scroll through tones at
high speed.
Holding down the  (FUNCTION) button as you
press w or q will jump 10 tones.
You can configure the keyboard so it plays two
different tones at the same time (Layer) or to play
different tones in the left and right ranges (Split). You
can even use Layer and Split in combination with each
other.
The following describes the various possible Layer and
Split combinations.
One tone across the entire keyboard (page E-11)
Use zone UPPER 1.
Two layered tones across the entire keyboard (page
E-13)
Use zones UPPER 1 and UPPER 2 at the same time.
Two tones, one for the left range and one for the
right range of the keyboard (page E-14)
Use zones UPPER 1 and LOWER 1 at the same time.
Four tones, two layered for the left range and two
layered for the right range of the keyboard (page
E-15)
Use zones UPPER1, UPPER2, LOWER1, and
LOWER 2 at the same time.
Three tones, one for one range and two layered for
the other range of the keyboard (page E-16)
Use all four zones at the same time, but with one
zone’s sound turned off by configuring one of the
zones with INT OFF to disconnect the internal sound
source. The example below shows INT OFF
configured for LOWER 2.
Layering and Splitting Tones
UPPER 1
UPPER 1
UPPER 2
LOWER 1 UPPER 1
LOWER 1 UPPER 1
LOWER 2 UPPER 2
LOWER 1 UPPER 1
UPPER 2
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio PX-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio PX-3 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio PX-3

Casio PX-3 User Manual - German - 70 pages

Casio PX-3 User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info