506040
47
Zoom out
Zoom in
Previous page
1/52
Next page
E-46
LOAD A TAPE
CARTRIDGE
THAT IS 36mm
OR WIDER
LOOK FOR?
NOT FOUND!
MEMORY FULL!
NO DATA!
NOT ENOUGH
MEMORY!
SET/ESC
PRESS [SET]
TO RECALL
Loaded tape width is
less than 36mm during
enlarged printing.
No text in memory
matches what you
specified.
Memory is full.
There is no data stored
in memory.
Not enough memory to
store a barcode.
Input characters were
left on the display the
last time power was
turned off.
Message Possible Cause Action Page
Use a tape cartridge
that is 36 mm or wider.
Specify the correct text
or scroll through text in
memory to find what
you want.
Delete data you no
longer need to make
room for more data.
You must have data in
memory before you
can search for data.
To print the barcode
without storing it,
press SET.
To store the barcode,
press ESC to return to
the PRESETS menu.
Delete memory data
you no longer need
and then perform the
barcode store opera-
tion again.
To recall the text that
was last on the dis-
play, press SET.
To perform another
operation without re-
calling text, simply
perform the opera-
tion.
E-8
E-33
E-42
E-36
E-37
E-36
E-36
E-35
E-36
E-8
E-39
INPUT TEXT!
INPUT TEXT
WILL BE
CLEARED!
OK TO
CONTINUE?
SET/ESC
LABEL HAS
TOO MANY
LINES!
LABEL IS
LONGER THAN
TAPE LENGTH!
SET/ESC
LENGTH OF
PRINT IS TOO
LONG!
LOAD A TAPE
CARTRIDGE
THAT IS 18mm
OR WIDER
Message Possible Cause Action Page
Attempt made to perform
text save without input-
ting text first.
Selecting enlarged
printing, the barcode
printing menu (PRE-
SETS), or the data
communication
menu(COMPUTER
LINK) while there is in-
put text on the display.
Too many lines to be
printed.
Tape length specified
for printing is longer
than the actual tape
length.
When printing text that
is longer than the al-
lowed length, the
length of each piece is
too long, or the number
of copies specification
causes the total print
length to be longer
than eight meters.
Loaded tape width is
less than 18mm during
barcode printing.
E-36
E-33
E-38
E-13
E-15
E-28
E-28
E-29
E-8
E-34
Input text and then per-
form text save opera-
tion.
To proceed with the
operation and delete
the text, press SET.
To cancel the opera-
tion, press ESC and
then save the text.
Reduce the number of
lines or use a wider
tape.
To proceed with the
print operation, press
SET.
To cancel printing,
press ESC. Next, you
can correct the con-
dition by reducing the
number of charac-
ters, changing the
tape length setting, or
turning on automatic
tape length setting.
Shorten the print
length or reduce the
number of copies.
Use a tape cartridge
that is 18 mm or wider.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KLC500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KLC500 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KLC500

Casio KLC500 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info