506040
46
Zoom out
Zoom in
Previous page
1/52
Next page
E-45
CANNOT
PRINT!
BAR CODE
MUST HAVE
EVEN NUMBER
OF DIGITS!
CANNOT PRINT!
NOT ENOUGH
DIGITS!
CANNOT
PRINT!
YOU ARE
USING ILLEGAL
CHARACTERS!
CANNOT
RECALL
MEMORY DATA
IN THIS MODE!
DATA ERROR!
RESET THE
LABEL
PRINTER!
GETTING
READY...
Even number of dig-
its input for ITF bar
code when a check
digit is being used.
Odd number of digits
input for ITF bar code
when a check digit is
not being used.
Bar code printed does
not have enough digits.
Invalid characters
used in a bar code.
Letter other than A,
B, C or D input for
CODABAR bar code
start code or end
code.
Attempt made to recall
barcode data as text.
Corrupted or lost
memory contents
due to low battery
power.
Attempting to save
text in memory be-
fore initializing
memory.
Attempting to print
text before initializing
memory.
Printer is hot.
Message Possible Cause Action Page
E-43
E-43
E-43
E-36
E-8
E-29
Add a 0 (zero) at the
first digit and re-input.
Add a 0 (zero) at the
first digit and re-input.
Re-input with the
proper number of dig-
its.
Change to allowed
characters.
Use only the allow-
able characters.
Recall data as barcode
data in the PRESETS
menu.
Perform the reset op-
eration and try again.
Wait for a while. Print-
ing will resume when
temperature returns to
normal.
If this problem hap-
pens often, try mak-
ing the print density
lighter (lower).
Using Labels
Data Communication
Messages
The messages in the following table are listed in alphabetical order.
Label will not adhere to a surface.
Possible Cause Action
Peel the backing paper from the back of the
tape to expose the adhesive.
Labels do not adhere well to surfaces that are
rough, wet, oily, or dirty.
Cannot transfer data.
Possible Cause Action
Make sure the data communication cable jacks
are connected securely.
Be sure to start actual data transfer within about
20 seconds after pressing SET to start a data
communication operation.
The backing paper is still
on the back of the tape.
Surface is unsuitable for
affixing a tape.
Poor data communication
cable connection
Passage of too much time
after setting up for data
communication
Message Possible Cause Action Page
CANCEL
FORMAT?
SET/ESC
CANNOT
INSERT!
You changed the
number of lines.
You specified char-
acter size (points) for
individual characters.
Recalling text into ex-
isting text results in
more than 511 charac-
ters or 16 blocks.
To cancel preset for-
mat specification
press SET.
If you do not want to
cancel the specifica-
tion, press ESC.
Reduce the number of
characters or blocks in
existing text.
E-23
E-15
E-25
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KLC500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KLC500 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KLC500

Casio KLC500 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info