587023
10
Zoom out
Zoom in
Previous page
1/19
Next page
E-9
2. Use the H J K and L cursor keys to move the underlining to the symbol
you want.
Not all of the available symbols fit on the display. The menu will scroll when
you press the cursor keys.
In this example, underline #.
3. After you underline the symbol you want, press
SET.
This returns to the input screen, with the symbol
you selected input at the location where the cur-
sor was located when you displayed the symbol
list.
Part 4 Deleting and Inserting Characters
This section describes everything you need to know about deleting and editing
characters you have already input.
Moving the Cursor
Use the cursor keys to move the cursor around the display and position it for
deleting and editing characters.
To move the cursor
Press H to move the cursor to the left, and J to move the cursor to the right.
Press FUNCTION and then H to make the cursor jump to the beginning (far
left) of the characters on the display.
Press FUNCTION and then J to make the cursor jump to the end (far right)
of the characters on the display.
Holding down the H or J cursor key moves the cursor at high speed.
Deleting Individual Characters
You can delete individual characters with either the BS key or the DEL key
(which is the K cursor key). The only difference between the operation of these
two keys is the location of the cursor.
To delete characters using the
BS
key
Example: To change the word commmputer to computer.
1. Use H and J to move the cursor under p.
2. Press BS twice to delete the two ms to the left of the cursor, shifting puter
to the left as you do.
3. Press FUNCTION and then J to jump back to the end of the characters for
more input.
To delete characters using the DEL key
Example: To change the word commmputer to computer.
1. Use H and J to move the cursor under the first (far left) m.
2. Press DEL twice to delete the two ms at the cursors position, shifting mputer
to the left as you do.
3. Press FUNCTION and then J to jump back to the end of the characters for
more input.
Clearing the Display
Use the following procedure to clear all input text from the display.
To clear the display
Press FUNCTION and then BS (CLS).
At this time the message CLS? appears on the display to confirm that you want
to clear the display. Press SET to clear or ESC to abort the operation without
clearing anything.
Text Editing
You can use the following procedures to edit text on the display.
To insert new characters
Example: To change the text ABCDEF to ABCXYZDEF.
1. With the original text on the display, move the cursor under the letter D.
IO
#
pute
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL-750E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL-750E in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KL-750E

Casio KL-750E User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info