587023
17
Zoom out
Zoom in
Previous page
1/19
Next page
E-16
To initialize the Label Printer
1. Turn power off.
2. While holding down the PRINT and ESC keys,
press ON to turn power on.
3. Keeping PRINT and ESC held down, release
the ON key only.
This prompt confirms whether or not you want to
initialize the Label Printer.
4. Press SET to initialize the Label Printer or ESC to abort the reset operation.
The following table shows the initial settings.
Troubleshooting
INT?
Item
Display
Memory
EFFECT
M-FEED
MIRROR
DENSITY
WIDTH
Reset
Cleared
Cleared
CANCEL
NO
OFF
3
OFF
Problem
ERR! message
on the display.
* This message
appears on the
screen for about
one second.
FUL! message on
the display.
* This message
appears on the
screen for about
one second.
BATT message
on the display.
ERR! message
on the display.
Possible Cause
Attempt to input two ¥
marks within the same
text.
Attempt to input ¥ mark
while 6mm is specified as
the tape width.
Label text containing a ¥
mark was input and then
tape width specification
was changed to 6mm.
(ERR! message appears
when you try to perform a
print operation.)
Text that is longer than
5.5cm when stamp
printing is selected.
Attempt to print a stamp
while 6mm is specified for
the tape width.
Both text memory areas
(AREA 1 and AREA 2)
already contain text.
Battery power is too low.
Memory data has become
corrupted for some reason.
Action
Use only one ¥ mark.
Only two lines of text can
be input, so text can
contain only one ¥ mark.
Do not use ¥ marks.
6mm tape can have only
one line of text, so text
cannot contain any ¥
marks.
Delete the ¥ mark to
print on 6mm tape or
switch back to a wider
tape.
Shorten the text to be
printed and try again.
Change the tape width
setting to OFF and try
printing the stamp again.
Delete text from one of
the text memory areas
and then store the new
text.
Replace batteries.
Initialize the Label
Printer.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL-750E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL-750E in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KL-750E

Casio KL-750E User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info