14279

Casio EA200 Manual

48
Zoom out
Zoom in
Previous page
1/55
Next page
20020601
English
Channel Operation Post-Processing FFT Samples
0 Clear all channels ––– ––– –––
*1 Channel 1 0 Clear the selected channel. 0 None
2 Channel 2 *1 Auto-ID *1 d/dt
–––
3 Channel 3 2 Voltage (± 10V) 2 d/dt, d
2
/dt
2
(for Voltage probe)
4 Resistance 10 FFT-Real 1 to 14 Samples used
5 Period 11 FFT-Real, Imaginary (*6) 2
n
(2-16384)
6 Frequency
7 Temperature (Celsius)
8 Temperature (Fahrenheit)
9 Light
10 Voltage (0-5V)
11 Absolute Time
4 SONIC Channel 0 Clear the SONIC channel. 0 None
*1 Meters *1 d/dt
2 Meters 2 d/dt, d
2
/dt
2
3 Feet –––
5 Period
6 Frequency
11 Absolute Time
5 DIG IN Port 0 Clear the digital input channel.
––– –––
*1 Active
6 DIG OUT Port Data String Output Loops Data string
0 Clear the digital input channel. 0 to 255 Output data element value
–––
1 to 32 Number of output data elements
(*1)
10 Microphone 0 Clear the Microphone. *0 None
*1 Active 10 FFT-Real 1 to 14 Samples used
11 FFT-Real, Imaginary (*6) 2
n
(2-16384)
11 Analog Out CH 3 1pin ±3Vout Data String Output Loops Data Output Selection Data string
0 Clear the analog out or speaker. *0 Data string ± 1.5 Output data element value
12 Speaker 1 to 65535 Number of output data elements
(*1) 1 Channel 1
2 Channel 2
3 Channel 3
10 Microphone
Pin No Trigger Threshold Trigger Edge (Operation = 5, 6)
*2 1pin Vin (± 10V) ± 10 Set input voltage threshold value *0 Rising edge to rising edge
–10 to +10. 1 Falling edge to falling edge
2 Rising edge to falling edge
3 Falling edge to rising edge
10 6pin Vin-low (0-5V) 0 to 5
Trigger Edge (Operation = 11)
*0 Rising edge
1 Falling edge
2 Rising and falling edge
• Channel = 1, 2, 3 or 4, Operation = 5, 6, 11
{ 1, Channel, Operation, Pin No, Trigger Threshold, Trigger Edge }
*: parameter value marked with asterisk are initial defaults. { 1, Channel, Operation, Post-Processing, FFT Samples }
α-1-1
Appendix A Command Tables
•Record Time for Operations 5, 6, and 11
must be 2, 1, and 1 respectively.
•Trigger Source for Channels 1, 2, 3, and 4
must be 2, 3, 4, and 12 respectively.
•Clock Source must be 10.
20020701
Command 1 - Channel Setup
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio EA200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio EA200 in the language / languages: English as an attachment in your email.

The manual is 2,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info