27153
21
Zoom out
Zoom in
Previous page
1/36
Next page
E-17
To record to one track while playing
back from the other track
This procedure is basically the same as that under To record
notes from the keyboard on page E-16.
Example: To play back Track A while recording to Track B
1
Select the track you want to play back.
While holding down the CONTROL button, press the
RECORD button as many times as necessary so the
Track A indicator lamp is lit.
2
Press the RECORD button to enter record standby.
This causes the Track A lamp to flash. While holding
down the CONTROL button, press the RECORD
button so the Track B indicator lamp is flashing.
3
Start recording.
Press the START/STOP button to start recording to
Track B as Track A plays back. Play in time with the
playback from Track A.
MEMO
You can adjust the tempo and beat during record
standby. Playback, however, is performed using the
tempo and beat that was selected when Track A was
selected.
Playback
Use the following procedure to play back from memory.
To playback from memory
1
Select the track(s) you want to play back.
While holding down the CONTROL button, press the
RECORD button. Each press of the RECORD button
causes the indicator lamps to cycle between the three
states shown below.
A track whose indicator lamp is lit is in playback
standby.
If you want to play back both tracks, both of the
RECORD buttons indicator lamps should be lit.
420A-E-021A
Using the Memory
2
Press the START/STOP button to start playback.
You can toggle the playback metronome sound on and
off by pressing the METRONOME button.
Playback stop automatically when the end of the tune
is reached.
To stop part way through, press the START/STOP
button.
To stop the metronome, press the METRONOME
button.
NOTE
You can change the playback tempo while playing back
from memory.
You cannot change the tone when playing back from
memory.
Deleting Memory Contents
IMPORTANT!
The delete operation cannot be undone. Make sure you
play back song memory contents and confirm that you
no longer need it before performing the following
procedure.
To delete the contents of a specific track
1
Enter record standby.
While holding down the CONTROL button, press the
RECORD button. Each press of the RECORD button
causes the indicator lamps to toggle between the two
states shown below. Make sure that the indicator lamp
for the track whose contents you want to delete is
flashing.
2
Press the START/STOP button twice to delete the
contents of the selected track.
To delete the contents of both tracks
1
Hold down the RECORD button for at least two
seconds, until the indicator lamps of both tracks
start to flash.
This indicates that the contents of both tracks have
been deleted.
Track A
Indicator
Lamp Lit
Track B
Indicator
Lamp Lit
Both
Indicator
Lamp Lit
Track A
Indicator Lamp
Flashing
Track B
Indicator Lamp
Flashing
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio AP24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio AP24 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AP24

Casio AP24 User Manual - German - 32 pages

Casio AP24 User Manual - Dutch - 30 pages

Casio AP24 User Manual - Spanish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info