27153
20
Zoom out
Zoom in
Previous page
1/36
Next page
E-16
420A-E-020A
Using the Memory
This section describes how to record keyboard play to
memory and playback data from memory.
About the Memory
Memory Capacity
There are two song memory tracks named Track A and
Track B. The two tracks can store a combined total of
approximately 5,200 notes.
The indicator lamp of the track you are recording to flashes
at high speed to let you know that remaining memory
capacity is running low.
Recording stops automatically whenever memory becomes
full.
Recorded Data
Anything you played on the keyboard (received MIDI data
not recorded)
Tone settings
Tempo and beat settings used during recording
Pedal operations
Reverb settings
Chorus settings
Recorded Data Storage
This digital piano has a lithium battery to supply power to
retain memory contents even while power is off.* The life of
the lithium battery is five years after the date of manufacture
of the digital piano. Be sure to contact your CASIO service
provider about having the lithium battery replaced every five
years.
* Never turn off digital piano power while a record operation
is in progress.
IMPORTANT!
If the data recorded in a single track uses up all the
available Song Memory capacity, you will not be able to
record anything in the other track.
Recording new data to a track automatically deletes any
data previously stored in that track.
Turning off power while a record operation is in progress
deletes anything recorded up to that point.
CASIO shall not be held responsible for any losses by
you or any third party due to loss of data caused by
malfunction or repair of this digital piano, or by battery
replacement.
Recording
In addition to recording notes as they are played on the
keyboard, you can also record to one track while playing back
from the other track. The following procedures cover each of
these operations.
To record notes from the keyboard
PREPARATION
Select the tone and effects you want to start with.
If you want to use the metronome during recording, start
the metronome. Use the procedure under Using the
Metronome on page E-14 to set the beat and the tempo.
1
Press the RECORD button to put the digital piano
into record standby.
Track A is selected first for recording, which is
indicated by its indicator flashing.
You can also change the metronomes beat setting at
this time.
If you want the metronome to sound while you are
recording, press the METRONOME button here to
start the metronome.
2
Select the track you want to record.
While holding down the CONTROL button, press the
RECORD button. Each press of the RECORD button
causes the indicator lamps to toggle between the two
states shown below.
3
Play something on the keyboard to start recording.
What you play sounds from the speakers and is
recorded into memory.
You can also start recording by pressing the START/
STOP button. In this case, blank space is inserted in
memory from the point that you press the START/
STOP button up to the point you start to play on the
keyboard.
4
After you are finished recording, press the START/
STOP button to stop the record operation.
At this time, the indicator lamp of the track you just
recorded will change from flashing to lit.
Stopping recording also stops the metronome.
Here you can press the START/STOP button and
playback the data you just recorded.
TRACK A TRACK B
RECORD
Track A
Indicator Lamp
Flashing
Track B
Indicator Lamp
Flashing
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio AP24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio AP24 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AP24

Casio AP24 User Manual - German - 32 pages

Casio AP24 User Manual - Dutch - 30 pages

Casio AP24 User Manual - Spanish - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info