624835
22
Zoom out
Zoom in
Previous page
1/26
Next page
Adjusting Hand Alignment
1.
Pull out the crown.
2.
Hold down the (A) button for about five
seconds until [HAND ADJ] flashes on the
display.
This indicates that hand alignment
adjustment has started.
[HAND SET] will flash first on the
display about 0.5 seconds after you
hold down the (A) button. Keep the
button depressed until [HAND ADJ]
flashes on the display.
All of the hands will move to 12 o’clock
when hand alignment adjustment is
complete.
3.
Check to make sure that all of the hands
are stopped at 12 o’clock.
Hand alignment will not be adjusted
correctly
if you advance to the next step
while the hands are still moving.
4.
Push the crown back in to complete the
setting operation.
After hand alignment adjustment is
complete, check to make sure that the
proper time is being indicated in the
Timekeeping Mode by the hands and
on the digital display. If the time
indication is not correct, adjust hand
alignment again.
Other Settings
Getting ready
Enter the Timekeeping Mode.
l
Navigating Between Modes
Timekeeping Mode
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the
tone that sounds when you press a button.
1.
Pull out the crown.
The second hand will move to the
currently set city.
Crown
2.
Press (B) twice so the current setting
([KEY♪] or [MUTE]) is displayed.
3.
Rotate the crown to select either [KEY♪]
or [MUTE].
[KEY♪]: Operation tone is enabled.
[MUTE]: Operation tone is muted.
4.
Push the crown back in to complete the
setting operation.
Configuring Power Saving
Function Settings
1.
Pull out the crown.
The second hand will move to the
currently set city.
Crown
2.
Press (B) six times so [P.SAVE] is
displayed.
3.
Rotate the crown to turn the setting on or
off.
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
4.
Push the crown back in to complete the
setting operation.
Note
For
details about Power Saving, see
Power Saving Function”.
Operation Guide 5470
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5470 - PRX-8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5470 - PRX-8000 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5470 - PRX-8000

Casio 5470 - PRX-8000 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info