624835
21
Zoom out
Zoom in
Previous page
1/26
Next page
Auto Light
If Auto Light is enabled, display illumination
will
turn on automatically whenever the watch
is positioned at an angle of 40 degrees or more
when it is dark.
40
degrees
or more
Important!
Auto
Light may not operate properly
when the watch is at a horizontal
angle of 15 degrees or greater from
horizontal as shown in the illustration
below.
Auto Light may operate
unintentionally and run down the
battery if the watch is blocked from
light by your sleeve.
Electro-static charge or magnetism
can interfere with proper auto light
operation. If this happens, try
lowering your arm and then angle it
towards your face again.
When moving the watch you may
note a slight rattling sound. This is
due to operation of the auto light
switch,
which determines the current
orientation of the watch. It does not
indicate malfunction.
Note
Auto
Light is disabled when any one
of the conditions below exists.
Alarm, timer alert, or other beeper
sounding
Watch in the Compass Mode
Time signal receive operation in
progress
Hand movement operation is
progress
If Auto Light is enabled, face
illumination may be delayed if you
angle the watch towards your face
while a compass, altitude,
barometric
pressure, or temperature
reading operation is being
performed.
Configuring the Auto Light
Setting
1.
In the Timekeeping Mode, pull out the
crown.
Crown
2.
Press (B) three times so [AUTO] is
displayed.
3.
Rotate the crown to turn the setting on or
off.
[ON]: Auto Light enabled.
[OFF]: Auto Light disabled.
4.
Push the crown back in to complete the
setting operation.
Specifying the Illumination
Duration
You can select either 1.5 seconds or three
seconds as the illumination duration.
1.
In the Timekeeping Mode, pull out the
crown.
Crown
2.
Press
(B) four times so the current setting
([LIGHT1] or [LIGHT3]) is displayed.
3.
Rotate the crown to select an illumination
duration.
[LIGHT1]: 1.5-second illumination
[LIGHT3]: 3-second illumination
4.
Push the crown back in to complete the
setting operation.
Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time
indicated by the analog hands to become
different from the time on the digital display. If
this happens, correct the hand position.
The watch has a function to adjust hand
alignment automatically.
Important!
You do not need to perform the
operation below as long as the
analog
hands indicate the same time
as the digital display.
Getting ready
Enter the Timekeeping Mode.
l
Navigating Between Modes
Timekeeping Mode
Operation Guide 5470
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5470 - PRX-8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5470 - PRX-8000 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5470 - PRX-8000

Casio 5470 - PRX-8000 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info