624853

Casio 5470 - PRW-6100 Manual

11
Zoom out
Zoom in
Previous page
1/26
Next page
Calibrating Altitude
Readings
To minimize the difference between locally
indicated and measured values, you should
update the reference altitude value before
setting off on and during treks or any other
activities where you take altitude readings.
You can find out the altitude at your current
location
from signs, maps, on the Internet, etc.
While mountain climbing, it is highly
recommended that you check a map, local
altitude indications, or some other source for
your current location’s altitude and regularly
calibrate watch readings with the latest
information.
●
Differences between actual altitude and
watch readings can be caused by the
factors below.
ー
Changes in barometric pressure
ー
Changes in temperature caused by
variations in barometric pressure and by
elevation
●
Though altitude readings can be taken
without calibration, doing so may produce
readings that are very different from
indications by altitude markers, etc.
1.
Pull out the crown.
Crown
2.
Rotate the crown to calibrate the
displayed value to that of a local altitude
(elevation) marker.
Calibration unit: 1 m (5 feet)
●
To
return the altitude setting to its initial
factory default, press (A) and (C) at the
same time.
3.
Push the crown back in to complete the
setting operation.
Taking a Relative Altitude
Reading from Some
Reference Point
After you set a reference altitude, the second
hand of the watch will indicate the difference
between your current altitude and the
reference altitude. This makes it easy to
measure the altitude different between two
points while climbing or trekking.
●
Setting the Altitude Differential
Measurement Range
1.
Pull out the crown.
Crown
2.
Press (B) twice.
3.
Rotate
the crown to select either [100m] or
[1000m].
[100m]: ±100 m (±328 feet) in 5 m (16 feet)
units
[1000m]: ±1000m (±3280 feet) in 50m
(164 feet) units
4.
Push the crown back in to complete the
setting operation.
●
Measuring Altitude
1.
Use the contour lines on your map to
determine the difference in altitude
between your current location and your
destination.
2.
Take an altitude reading of your current
location.
l
Checking the Current Altitude
3.
Hold down the (D) button for about two
seconds to set your current location’s
altitude as the reference altitude.
[DIFF RESET] and [RESET] will appear
on the display, followed by the current
altitude.
●
The second hand (Altitude Differential
Indicator) will indicate the difference
between the reference altitude and the
current
altitude reading. At this time the
second hand should indicate ±0 m (±0
feet).
Current location altitude
Altitude Differential Indicator
4.
While comparing the difference between
the
altitude you found on the map and the
altitude differential indicated by the
watch’s second hand, advance towards
your destination.
●
When
the altitude differential you found
on the map is the same as that indicated
by the second hand, it means you are
close to your destination.
Example: Altitude differential of -30 m (-98
feet) (-300 m (-984 feet))
Altitude Differential
Indicator
Range: ±100 m (1000 m)
(±328 feet (3280 feet))
Unit: m
5.
To exit the altitude differential indication,
press (D).
The second hand indicates the current
time seconds.
●
To toggle the second hand between
altitude differential and current time
seconds indication, press (D).
Operation Guide 5470
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5470 - PRW-6100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5470 - PRW-6100 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5470 - PRW-6100

Casio 5470 - PRW-6100 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info