624832
9
Zoom out
Zoom in
Previous page
1/12
Next page
Adjusting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
time indicated by the hands and the day
indicator to go out of alignment. If this
happens, adjust hand and day indicator
alignment.
The watch performs alignment of the hour
hand, minute hand, second hand, and 24-
hour hand automatically.
Adjusting Hand and Day
Indicator Alignment
1.
Pull out the crown to the second click.
2.
Hold down
(B) for about five seconds, until
the second hand moves to 12 o’clock.
This will start auto alignment of the hour
hand, minute
hand, second hand, and 24-
hour hand.
After auto alignment is complete, the
hands should
be in the positions shown
below.
30
Crown
24-hour
hand
Hour hand
Minute hand
Second
hand
If the 24-hour hand is off by 12 hours,
hold down (A) for about two seconds.
The 24-hour hand will move to 12
o’clock.
3.
Press (C).
Confirm that the small hour hand and
small minute hand are stopped at 12
o’clock.
30
Small Minute
Hand
Small Hour
Hand
4.
If the small hour hand and small minute
hand are not at 12 o’clock, rotate the
crown to align them correctly.
5.
Press (C).
Confirm that the mode hand is stopped at
12 o’clock.
30
Mode hand
6.
If the
mode hand is not at 12 o’clock, rotate
the crown to align it correctly.
7.
Press (C).
Confirm that the day indicator shows 1.
1
Day
8.
If 1 is not shown for the day, rotate the
crown until 1 is shown.
9.
Push the crown back in.
Note
Leaving the crown pulled out for
more than
approximately 30 minutes
without performing any operation
will automatically cause the
adjustment operation to become
disabled. If this happens, push the
crown back in to its normal position
and then pull it out again to restart
the procedure from the beginning.
Pushing the crown in to its normal
position part way through the
alignment procedure will cause the
hands to return to their normal
position. Any alignment you
performed up to that point will be
applied.
Moving To Another
Time Zone
Use the procedure below to easily change day
and time
settings of the watch to a destination
location.
Any time you perform a GPS signal receive
operation, the
watch may try to acquire leap
second information. A leap second
information receive operation can take as
long as 13 minutes. Make sure the watch is
sufficiently charged before performing a
GPS signal receive operation after you
arrive at your destination.
Prior to Takeoff
1.
Enter the watch’s Airplane Mode when
instructed to do so by airline personnel.
30
After Arriving
1.
Exit the Airplane Mode.
2.
Perform
a
GPS signal position acquisition
operation, which will adjust the watch’s
time setting to your current location.
l Using the Watch on an Aircraft
l Acquiring GPS Position Information
Manually
Operation Guide 5412
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5412 - OCW-G1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5412 - OCW-G1000 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5412 - OCW-G1000

Casio 5412 - OCW-G1000 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info