624832
7
Zoom out
Zoom in
Previous page
1/12
Next page
2.
Rotate the
crown to change the time zone.
The small hour hand and small minute
hand indicate the current time in the
selected time zone.
Hold down (B) for about one second to
display UTC (Coordinated Universal
Time) time.
30
Small
Minute
Hand
Small Hour Hand
Crown
3.
Hold down the (A) button for about one
second to change the summer time
setting.
Each press of (A) cycles through
available settings in the sequence
shown below.
“AT (AUTO)” n “STD” n “DST”
30
“AT (AUTO)”
The watch switches between standard
time and summer time automatically.
“STD”
The watch always indicates standard
time.
“DST”
The watch always indicates summer
time.
4.
Push the crown back in.
Note
When a time zone for which there is
no city name displayed is selected,
use “STD” or “DST” for the summer
time setting.
You cannot switch between “STD”
and “DST” while “UTC” is selected
as the Home City (time zone).
Stopwatch
The stopwatch measures elapsed time in units
of 1/20 (0.05) seconds up to 23 minutes, 59.95
seconds (24 minutes).
Getting ready
Enter the Stopwatch Mode.
l Navigating Between Modes
30
Measuring Elapsed Time
30
Mode hand
Stopwatch
1/20 (0.05)-second
Stopwatch minutes
and seconds
1.
Use the operations below to measure
elapsed time.
A
A
A
A
Stop
Resume
Stop
Start
The stopwatch 1/20 (0.05)-second
hand will move for the first 30 seconds
after an elapsed time measurement
operation is started, and then stop.
When the elapsed time measurement
operation is stopped, the hand will
move to the appropriate position to
indicate the final 1/20 (0.05)-second
count.
2.
Press (B) to reset the stopwatch.
3.
Press (C) to return to the Timekeeping
Mode.
Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch’s
time and day settings when GPS and
time calibration signal reception is not
possible for some reason.
Selecting a Time Zone
Use the procedure in this section to select a
city (time zone) to use as your Home City. If
you are
in an area that observes summer time,
you can also enable or disable summer time.
Note
The initial factory default summer
time setting for all cities (time zones)
is “AT (AUTO)”. With this setting, the
watch automatically switches
between summer time and standard
time as required. The “AT (AUTO)”
setting lets you use the watch
without worrying about changing the
summer time setting.
When performing a manual
operation to select a time zone for
which there is no city name
displayed, use “STD” or “DST” for
the summer time setting.
In the cases described below,
receiving GPS position information
will automatically cause “AT
(AUTO)” to be selected for the
summer time setting.
When
the
time zone of the current
receive operation is different from
the watch’s time zone setting prior
to the receive operation.
When the time zone is
unchanged, but the acquired
position information is for a
geographic area with different
summer time rules (start date, end
date)
Operation Guide 5412
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5412 - OCW-G1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5412 - OCW-G1000 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5412 - OCW-G1000

Casio 5412 - OCW-G1000 User Manual - German - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info