Manual Casio 5245 - G-1400 (page 5 of 6) (English)

624483

Zoom out

Zoom in

1/6

Operation Guide 5245

E-49

The watch is returning to the Timekeeping Mode automatically from the Alarm Mode x

(page E-43).

■ Hands suddenly stop moving. Button operation also is disabled.

The watch may be in the power recovery mode (page E-12). Do not perform any

operation until the hands return to their normal positions (in about 15 minutes). The

hands should return to their correct positions when normal operation returns. To help

power recover, leave the watch in a location where it is exposed to light.

■ The current time setting is off by hours.

Your Home City setting may be wrong. Check your Home City setting and correct it, if

necessary (page E-20).

■ The current time setting is off by one hour.

Use the procedure under “To toggle the Home City time between standard time and

daylight saving time” (page E-22) to change the STD/DST setting.

E-48

Troubleshooting

Hand Movement and Position

■ I lost track of what mode the watch is in.

Refer to “To select a mode” (page E-18). To return directly to the Timekeeping Mode

from any other mode, hold down C for about two seconds.

■ The

Second Hand is moving at two-second intervals.

■ All the watch’s hands are stopped at 12 o’clock and none of the buttons work.

Power may be low. Expose the watch to light until the

Second Hand starts moving

normally, at one-second intervals (page E-10).

■ The hands of the watch suddenly start moving at high speed, even when I do

not perform any operation.

This could be due to any one of the following causes. In all cases, the hand movement

does not indicate malfunction, and should stop shortly.

The watch is recovering from a sleep state (page E-14).

E-47

After conﬁ rming that the 5.

Left Dial Hands are in the

correct home positions, press C. This will advance to

Right Dial Hand home position adjustment.

The x

Right Dial Hand is in the correct home position

if it is pointing at 12 o’clock. If it isn’t, use D (+) and

B (–) to move it to 12 o’clock.

After conﬁ rming that the 6.

Right Dial Hand is in the

correct home position, press C. This will advance to

Day home position adjustment.

The x

Day is in the correct home position if it

shows 1. If it doesn’t, use D (+) and B (–) to change

the day to 1.

Press 7. A to return to the Timekeeping Mode.

The

Day moves to the current day, and then the

Hour Hand and the

Minute Hand move to the current time. Wait until everything stops moving.



E-46

After conﬁ rming that the 3.

Second Hand is at the proper home position, press C.

This will switch to

Hour Hand and

Minute Hand home position adjustment.

The x

Hour Hand and

Minute Hand are at their proper home positions if

they both move to 12 o’clock. The

24-hour Hand also will move along with

Hour Hand movement, and cannot be adjusted individually. If the hands are

not positioned correctly, use D (+) and B (–) to move them to their proper

home positions.

After conﬁ rming that the 4.

Hour Hand and

Minute

Hand are in their correct home positions, press C.

This will switch to

Left Dial Hands home position

adjustment.

The

Left Dial Hands are at their proper home

positions if they both move to 12 o’clock. If the hands

are not positioned correctly, use D (+) and B (–) to

move them to 12 o’clock.



B +

E-45

The watch is now in the home position adjustment x

mode.

The watch will exit the adjustment mode automatically x

if you do not perform any operation for about two or

three minutes.

First is

Second Hand home position adjustment.

If the x

Second Hand moves to 12 o’clock, it is in the

correct home position. If it doesn’t, use D to move it

to 12 o’clock.

Each press of

x C in the home position adjustment

mode will cycle through the adjustment settings as

shown below.



Second

Hour/

Minute/

24-hour

Left Dial Hands

Right Dial Hand

Day

C C

E-44

Adjusting the Home Positions

Strong magnetism or impact can cause the hands and/or date of the watch to be off.

If this happens, perform the applicable home position adjustment procedures in this

section.

Note

Any time after you enter the home position adjustment mode in step 1 of the following

procedure, you can return to the Timekeeping Mode by pressing A. The watch also

will return to the Timekeeping Mode automatically if you do not perform any operation

for about two or three minutes in home position adjustment mode. In either case, any

adjustments you made before the watch returned to the Timekeeping Mode will be

applied.

To adjust the home positions

Hold down 1. C for about two seconds until the watch beeps twice and enters the

Timekeeping Mode.

Hold down 2. D for about three seconds until the watch beeps.

E-43

To change the alarm time setting

Use 1. C to move the

Right Dial Hand to ALM.

Use 2. D (+) and B (–) to change the alarm time setting.

Each press of either button will move the

Left Dial Hands one minute.

Holding down x D or B will start high-speed hand movement in the applicable

direction. To stop high-speed hand movement, press any button.

The alarm always works based on the time kept in the Timekeeping Mode.

The watch will return to the Timekeeping Mode automatically if you do not x

perform any operation in the Alarm Mode for about two or three minutes.

To turn the alarm on or off

In the Alarm Mode, press A to toggle the alarm on and off. The

Second Hand will

indicate the current ON/OFF setting.

To stop the alarm

Press any button.

E-42

Using the Alarm

When the alarm is turned on, an alarm will sound for about 10 seconds each day

when the time in the Timekeeping Mode reaches the preset alarm time. This is true

even if the watch is not in the Timekeeping Mode.

Hand Functions

Second Hand:

Indicates the current alarm ON/OFF setting.

Left Dial Hands:

Indicate the current alarm time setting in 24-hour

format.

Right Dial Hand: Points to ALM.



* 6

E-41

After swapping the Home City and World Time City, the watch will stay in the x

World Time Mode. The

Second Hand will point to your new World Time City

(TYO in this example).

The

Left Dial Hands will indicate the current time in your new World Time City.

E-40

To swap your Home City and World Time City

In the World Time Mode, use 1. D to select the World Time City you want.

In this example, you would move the

Second Hand

to NYC in order to select New York as the World

Time City.

Wait until the

Left Dial Hands complete their move

to the time in the currently selected World Time

City. You will not be able to perform step 2 of this

procedure until the hands stop moving.

Hold down 2. B for about three seconds until the watch

beeps.

This will make the World Time City ( x NYC in this

example) your new Home City. At the same time, it will

change the Home City you had selected prior to step 2

(TYO in this example), to your new World Time City



My Casio 5245 g1400 only minute hand /hour hand / date only working the rest not normal ,second hand stops at 12 o’clock.
Submitted on 1-5-2020 at 06:35
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5245 - G-1400 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio 5245 - G-1400 Manual

Product: