624483

Casio 5245 - G-1400 Manual

3
Zoom out
Zoom in
Previous page
1/6
Next page
Operation Guide 5245
E-29
@
0
6
1
4
2
3
7
9
8
5
Setting the year (ones digit)
Use 5. D to change the ones digit of the year
setting.
Each press of
x D will move the
x
Second
Hand and change the ones digit of the
year setting.
After the ones digit of the year setting is the 6.
way you want, press C.
The watch will beep and change to the
x
month setting mode.
E-28
Use 3. D to change the tens digit of the year setting.
Each press of x D will move the
x
Second Hand and change the tens digit of the
year setting.
After the tens digit of the year setting is the way you want, press 4. C.
The watch will beep and change to the ones digit of the year setting mode.
x
E-27
To change the current date setting
@
00
60
10
40
20
30
70
90
80
50
Setting the year (tens digit)
In the Timekeeping Mode, keep 1. A
depressed (for about fi ve seconds) as the
x
Second Hand moves to the city code of the
currently selected Home City.
Press 2. C twice.
The watch will beep and change to the
x
year setting mode.
The year can be set in the range of 2000
x
to 2099.
You can save your settings and exit the x
setting procedure at any time by pressing
A, which will return to the Timekeeping
Mode. This will cause the
x
Second Hand
to move automatically to 12 o’clock and
resume normal movement from there.
E-26
Use 4. D (+) and B (–) to change the time (hour and minute) setting.
Each press of either button will move the hands ( x
z
Hour Hand and
c
Minute
Hand) one minute.
Holding down
x D or B will start high-speed
z
Hour Hand and
c
Minute Hand
movement in the applicable direction. To stop high-speed hand movement,
press any button.
The
x
v
24-hour Hand and
z
Hour Hand move in sync with each other.
When setting the time, make sure that the
x
v
24-hour Hand indicates the proper
a.m./p.m. hour.
If you want to change the date setting at this time, press
x C and perform the
procedure starting from step 3 under “To change the current date setting” (page
E-27).
After the time setting is the way you want, press 5. A to return to the Timekeeping
Mode.
This will cause the
x
x
Second Hand to move automatically to 12 o’clock and
resume movement from there.
E-25
Change the Home City and daylight saving time (DST) 2.
settings, if you want.
For details about these settings, see steps 2 and
x
3 under “To confi gure Home City settings” (page
E-20).
In the following steps, each press of
x C cycles
between settings as shown below.
Home city/DST Hour/Minute
Year (ones digit)Day Month
C
C
CC
Year (tens digit)
CC
Press 3. C.
The watch will beep, and the x
x
Second Hand and
n
Right Dial Hand will move
to their 12 o’clock positions. This is the time setting mode.

B +
6>
@
E-24
Confi guring Current Time and Date Settings
You can confi gure current time and date settings.
To change the current time setting
In the Timekeeping Mode, keep 1. A depressed (for
about fi ve seconds) as the
x
Second Hand moves to
the city code of the currently selected Home City.
At this time, the
x
n
Right Dial Hand will indicate the
Home City’s current daylight saving time setting
(STD or DST).

6
@
E-23
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
x
Mode to calculate the current time for other time zones based on the current time
in your Home City.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The *
reference point for UTC is Greenwich, England.
E-22
To toggle the Home City time between standard time and daylight saving time
Perform the step 1 under “To confi gure Home City settings” on page E-20.1.
Each time you select a city code, the
x
z
Hour Hand,
c
Minute Hand, and
v
24-hour Hand move to the current time for that city code. Do not perform the
next operation until these hands stop moving.
Press 2. B to toggle the time for the city code of the currently selected Home City
between STD (standard time)/DST (daylight saving time).
In the city code setting mode, the
x
n
Right Dial Hand indicates the current
daylight saving time setting as STD (standard time) or DST (daylight saving
time).
Note that you cannot switch between
x STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After the setting is the way you want, press 3. A to return to the Timekeeping Mode.
E-21
To change the Home City setting, press 2. D to move
the
x
Second Hand clockwise.
Keep pressing
x D until the
x
Second Hand is
pointing at the city code you want to select as your
Home City.
Each time you select a city code, the
x
z
Hour Hand,
c
Minute Hand,
v
24-hour Hand and
m
Day move
to the current time and date for that city code. Do
not perform the next operation until these hands
stop moving.
Press 3. B to toggle the time for the currently selected
city code between STD (standard time)/DST (daylight
saving time).
In the city code setting mode, the
x
n
Right Dial Hand indicates the current
daylight saving time setting as STD (standard time) or DST (daylight saving time).
Note that you cannot switch between
x STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After the setting is the way you want, press 4. A to return to the Timekeeping Mode.

B +
@ 6> 5
E-20
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that corresponds
x
to Newfoundland.
In the Timekeeping Mode, keep 1. A depressed (for
about fi ve seconds) as the
x
Second Hand moves to
the city code of the currently selected Home City.
This indicates the city code setting mode.
x
The watch will exit the setting mode automatically if x
you do not perform any operation for about two or
three minutes.
For details about city codes, see the “City Code
x
Table” at the back of this manual.

@
3


Need help? Post your question in this forum.

Forumrules
1

Forum

casio-5245---g-1400

Reset search

  • My Casio 5245 g1400 only minute hand /hour hand / date only working the rest not normal ,second hand stops at 12 o’clock.
    Submitted on 1-5-2020 at 06:35

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5245 - G-1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5245 - G-1400 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info