624519
5
Zoom out
Zoom in
Previous page
1/7
Next page
Operation Guide 3403
E-49
Auto Light Precautions
Auto Light may not work properly if your arm is angled horizontally x
15˚ or more as shown in the illustration.
The presence of static electricity or magnetism can cause Auto
x
Light not to work. If this happens, try lowering your arm and
raising it back up again.
You may notice a rattling sound inside the watch when you angle
x
it towards your face. This is the sound of the Auto Light switch,
and does not indicate malfunction.
Auto Light remains enabled only for about six hours. After that it is
x
disabled automatically.
E-48
To enable or disable Auto Light
In the Timekeeping Mode, hold down
L
for at least
three seconds.
This will toggle Auto Light between enabled (Auto Light
ON indicator displayed) and disabled.
Auto Light ON indicator
E-47
Using Auto Light
When Auto Light is enabled, angling the watch towards your face at an angle of 40˚
or greater will illuminate the display automatically.
40˚ or greater
Note
Auto Light is disabled automatically while an alarm is sounding.
E-46
Illumination
You can use the procedure below to illuminate the display for easy reading in the
dark.
To illuminate the display
Press
L
to illuminate the display.
Note
Illumination will turn off automatically if it is on when an alarm time or the end of a
countdown is reached.
Light Use Precautions
Frequent use of the light can shorten battery life.
E-45
Press
3
D
to toggle the setting between [VIB] and
[FLASH].
The Vibration indicator is shown on the display while
[VIB] is selected.
: Alert by vibration.
:
Alert by tone and fl ashing display
illumination.
To return to the Timekeeping Mode, press
4
A
.
To test vibration
In the Timekeeping Mode, hold down
B
to perform the vibration operation.
Vibration indicator
E-44
To return to the Timekeeping Mode, press
4
A
.
Note
The above procedure affects the button operation tone only. The alarm, hourly time
signal, and time up alarm are not affected.
To change the alarm/timer alert method
In the Timekeeping Mode, hold down
1
A
for about
two seconds until the time zone setting screen
appears.
1
Press
2
C
11 times to display alert setting screen.
See “Confi guring Current Time and Date Settings”
(page E-15).
The screen will show either [VIB] or [FLASH].
E-43
Press
2
C
nine times to display the button
operation tone setting screen.
See “Confi guring Current Time and Date Settings”
(page E-15).
The screen will show either [KEY
] or [MUTE].
MUTE indicator
Press
3
D
to toggle the setting between
[KEY
] (ON) and [MUTE] (OFF).
When [MUTE] (OFF) is selected, a MUTE indicator is
displayed to indicate that the button operation tone
will not sound.
E-42
Other Settings
You can use the procedures in this section to turn the tone that sounds when you
press a button on or off.
You can also select either tone and display illumination fl ashing, or vibration as the
alert method for the alarm and timer.
To turn the button operation tone on or off
In the Timekeeping Mode, hold down
1
A
for about
two seconds until the time zone setting screen
appears.
E-41
Note
If a countdown was stopped part way through in the Timer Mode, the current
x
(stopped) countdown time will be displayed when you press A in the Timekeeping
Mode.
While a countdown is in progress, the display will show the countdown. You can
x
switch to display of the day of the week and day by pressing A.
To stop a tone/vibration alert operation
Pressing any one of the buttons will stop an ongoing tone/vibration alert
operation.
E-40
Note
If a previous countdown was stopped part way through in the Timer Mode,
x
pressing D will resume the countdown.
The x D button will be disabled if a countdown that was started in the Timer Mode
is still in progress.
An ongoing countdown (started in either the Timer Mode or Timekeeping Mode)
x
cannot be stopped or reset in the Timekeeping Mode.
To view the timer start time
In the Timekeeping Mode, press
A
.
This will cause the timer start time (the start time you set with the procedure on
page E-36) to appear for one second in the display in place of the day of the
week and day.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 3403 - GD-350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 3403 - GD-350 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 3403 - GD-350

Casio 3403 - GD-350 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info