624519
3
Zoom out
Zoom in
Previous page
1/7
Next page
Operation Guide 3403
E-29
To change an alarm time setting, hold down
3
A
for about two seconds until
the hour digits of the current alarm time start to fl ash.
[SET Hold] will appear on the display. After that, [SET
Hold] will disappear and the hour digits will fl ash.
Each press of
4
C
causes the fl ashing to move between the hour and the
minutes digits.
The fl ashing digits are the ones that are selected.
Use
5
B
and
D
to change the fl ashing setting, and set the hour and minutes
you want.
Holding down either button scrolls the setting at high speed.
x
If you are using 12-hour timekeeping, the PM indicator will appear for times x
between noon and 11:59 p.m.
E-28
Hourly time signal
: Hourly time signal does not sound.
: Hourly time signal sounds every hour on the hour.
The Alarm indicator is displayed while an alarm is turned on, while the Hourly
time signal indicator is displayed while the hourly time signal is turned on.
When the snooze alarm is turned on, both the alarm indicator and the snooze
indicator are displayed.
Hourly time signal on
Hourly time signal indicator
Alarm on
Alarm indicatorSnooze indicator
E-27
Use
2
B
to select the alarm type or to toggle the hourly time signal between
on and off.
Alarm 1 to 4
: Alarm does not sound.
:
Alarm sounds only once at the preset time and does not sound again after
that.
: Alarm sounds at the preset time each day.
Snooze alarm
: Alarm does not sound.
:
Alarm sounds at the preset time each day, and up to seven times at fi ve-
minute intervals thereafter.
E-26
To change an alarm setting
In the Alarm Mode, use
1
D
to select the alarm whose setting you want to
change.
Alarm 1
( )
D D
Alarm 2
( )
Alarm 3
( )
Alarm 4
( )
Hourly Time
Signal ( )
Snooze alarm
( )
DD
D D
E-25
Alarm setting screen
Alarm number
Current time
Hourly time signal setting screen
Current time
Note
If you do not perform any operation for about two or three minutes while in the Alarm
Mode, the watch will automatically return to the Timekeeping Mode.
E-24
Alarms and Hourly Time Signal
You can set up to fi ve different alarms. When any one of the alarm times is reached
the watch will sound an alarm tone and fl ash its display illumination, or it will vibrate
for about 10 seconds. The hourly time signal causes the watch to sound a tone and
ash its display illumination or to vibrate every hour on the hour.
See “To change the alarm/timer alert method” (page E-44).
To enter the Alarm Mode
In the Timekeeping Mode, press
C
twice to enter the Alarm Mode.
See “Using Modes” (page E-12).
[ALARM] will appear on the display for about one second. After that, an alarm
setting screen (Alarm 1 through Alarm 5, or hourly time signal) will appear.
E-23
Note
Summer time, or Daylight Saving Time (DST) as it is known in some countries,
x
calls for setting clocks ahead one hour from standard time during the summer
season. Note that the period during which and the areas where summer time is
applied depend on each country. Some countries or geographic areas may not use
summer time.
The DST indicator will be on the display and timekeeping will be advanced by one
x
hour when summer time is turned on.
The summer time setting cannot be changed for the UTC World Time zone. x
The summer time setting is applied to the currently selected time zone only. A x
setting confi gured for one time zone does not affect any other time zone.
E-22
To confi gure the Summer Time (DST) setting
In the World Time Mode, hold down
A
for about two seconds.
[DST Hold] will appear on the display. After that,
x
[DST Hold] will disappear and the summer time
setting will toggle to either on or off.
x DST on the display indicates that summer time is
turned on.
DST indicator
E-21
Note
Scrolling of the World Time city name will stop after about two minutes. To re-
start scrolling, press A.
Use
2
B
and
D
to scroll through the World Time Mode city names.
See “City Name List” (back of this manual).
Scrolling to a city name displays the current time in that city. x
Holding down either button scrolls at high speed. x
To display the UTC city name (UTC offset 0), press x B and D at the same
time.
To return to the Timekeeping Mode, press
3
C
four times.
E-20
World Time
World Time lets you display the current time in any one of 100 cities (35 time zones)
around the world.
To view the times in other time zones
In the Timekeeping Mode, press
1
C
to enter the World Time Mode.
See “Using Modes” (page E-12).
[WT100] will appear on the display for about
1
one second, and then the name of the
currently selected World Time city will scroll
across the display.
Current date in
World Time city
Current time in
World Time city
City name
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 3403 - GD-350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 3403 - GD-350 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 3403 - GD-350

Casio 3403 - GD-350 User Manual - German - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info