Manual Casals VNPLI14M-2 (page 5 of 84) (English, German, French, Italian, Portuguese, Spanish)

727570

Zoom out

Zoom in

1/84

create a risk of fire when used with another

battery pack.

- Use power tools only with specically des-

ignated battery packs. Use of any other bat-

tery packs may create a risk of injury and fire.

- When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a con-

nection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

- Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

- Do not use a battery pack or tool that is

damaged or modied. Damaged or modi-

fied batteries may exhibit unpredictable be-

havior resulting in fire, explosion or risk of

injury.

- Do not expose a battery pack or tool to

re or excessive temperature. Exposure to

fire or temperature above 130ºCmay cause

explosion.

- Follow all charging instructions and do

not charge the battery pack or tool out-

side the temperature range specied in

the instructions. Charging improperly or

at temperatures outside the specified range

may damage the battery and increases the

risk of fire.

- Remove the batteries from the appliance

if you are not going to use it for some time.

- Disconnect the battery charger from the

mains when not in use and before undertak-

ing any cleaning task.

- Do not open the battery/ies under any cir-

cumstances whatsoever.

source and/or battery pack, if detach

able, from the power tool before making

any adjustments, changing accessories,

or storing power tools. Such preventive

safety measures reduce the risk of starting

the power tool accidentally.

- Store idle power tool out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

- Maintain power tools and accessories.

Check for misalignment or binding of

moving parts, breakage of parts and

any other condition that may affect the

power tool’s operation. If damaged, have

the power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

- Keep cutting tools sharp and clean

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

- Use the power tool, accessories and tool

bits etc in accordance with these instruc

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazard

ous situation.

- Keep handles and grasping surfaces

dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do

not allow for safe handling and control of the

tool in unexpected situations.

Battery tool use and care

- Recharge only with the charger speci

ed by the manufacturer. A charger that

is suitable for one type of battery pack may

- When the battery/ies is not in use, keep

it away from other metal objects like paper

clips, coins, keys, screws ... that could con-

nect a terminal to another.

- The battery/ies should be stored at a tem-

perature of below 40ºC.

Service

- Have your power tool serviced by a

qualied repair person using only iden-

tical replacement parts. This will ensure

that the safety of the power tool is main-

tained

- Never service damaged battery packs.

Service of battery packs should be only be

performed by the manufacturer or author-

ized service providers.

-Any misuse or failure to follow the instruc-

tions for use renders the guarantee and the

manufacturer’s liability null and void.

Drill safety warnings

- Wear ear protectors when impact drill-

ing. Exposure to noise can cause hearing

loss.

- Use auxiliary handle(s), if supplied

with the tool. Loss of control can cause

personal injury.

- Hold power tool by insulated gripping

surfaces, when performing an opera-

tion where the cutting accessory may

contact hidden wiring. Cutting accessory

contacting a “live” wire may make exposed

metal parts of the power tool “live” and

could give the operator an electric shock.

Screwdriver safety warnings

- Hold the power tool by insulated grip-

ping surfaces, when performing an op-

eration where the fastener may contact

hidden wiring. Fasteners contacting a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casals VNPLI14M-2 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casals VNPLI14M-2 Manual

Product: