Manual Casals VNPLI14M-2 (page 4 of 84) (English, German, French, Italian, Portuguese, Spanish)

727570

Zoom out

Zoom in

1/84

- Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting the power source and/or bat-

tery pack, picking up or carrying the tool.

Carrying power tools with your finger on the

switch or energizing power tools that have

the switch on invites accidents.

- Remove any adjusting key or wrench be-

fore turning the power tool on. A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

- Do not overreach. Keep proper footing

and balance at all times. This enables bet-

ter control of the power tool in unexpected

situations.

- Dress properly. Do not wear loose

clothing or jewellery. Keep your hair and

clothing away from moving parts. Loose

clothes, jewellery or long hair can be caught

in moving parts.

- If devices are provided for the connec-

tion of dust extraction and collection fa-

cilities, ensure these are connected and

properly used. Use of dust collection can

reduce dust-related hazards.

- Do not let familiarity gained from fre-

quent use of tools allow you to become

complacent and ignore tool safety prin-

ciples. A careless action can cause severe

injury within a fraction of a second.

Power tool use and care

- Do not force the power tool. Use the cor-

rect power tool for your application. The

correct power tool will do the job better and

safer at the rate for which it was designed.

- Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

- Disconnect the plug from the power

create a risk of fire when used with another

battery pack.

- Use power tools only with specically des-

ignated battery packs. Use of any other bat-

tery packs may create a risk of injury and fire.

- When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a con-

nection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

- Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

- Do not use a battery pack or tool that is

damaged or modied. Damaged or modi-

fied batteries may exhibit unpredictable be-

havior resulting in fire, explosion or risk of

injury.

- Do not expose a battery pack or tool to

re or excessive temperature. Exposure to

fire or temperature above 130ºCmay cause

explosion.

- Follow all charging instructions and do

not charge the battery pack or tool out-

side the temperature range specied in

the instructions. Charging improperly or

at temperatures outside the specified range

may damage the battery and increases the

risk of fire.

- Remove the batteries from the appliance

if you are not going to use it for some time.

- Disconnect the battery charger from the

mains when not in use and before undertak-

ing any cleaning task.

- Do not open the battery/ies under any cir-

cumstances whatsoever.

source and/or battery pack, if detach-

able, from the power tool before making

any adjustments, changing accessories,

or storing power tools. Such preventive

safety measures reduce the risk of starting

the power tool accidentally.

- Store idle power tool out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

- Maintain power tools and accessories.

Check for misalignment or binding of

moving parts, breakage of parts and

any other condition that may affect the

power tool’s operation. If damaged, have

the power tool repaired before use. Many

accidents are caused by poorly maintained

power tools.

- Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

- Use the power tool, accessories and tool

bits etc in accordance with these instruc-

tions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations different

from those intended could result in a hazard-

ous situation.

- Keep handles and grasping surfaces

dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do

not allow for safe handling and control of the

tool in unexpected situations.

Battery tool use and care

- Recharge only with the charger speci-

ed by the manufacturer. A charger that

is suitable for one type of battery pack may

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casals VNPLI14M-2 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casals VNPLI14M-2 Manual

Product: