587694

Carrier 38MCJ 334 Manual

18
Zoom out
Zoom in
Previous page
1/44
Next page
18
Installation Installazione
38MHJ - 38MC - 38MCJ 334
ABC
207 522 254 361
209,211,212 562 324 431
334 562 324 431
• Position the unit on the support and
fasten.
• Posizionare l’unità sulle staffe ed avvitare
come indicato.
Unit installation
The unit may be suspended from an
outside wall or placed on the ground. In
both cases, ensure that the unit is level.
Some type of vibration absorber should be
used to reduce the transmission of
vibrations.
Suspension from an outside wall
This kind of installation requires the use of
the optional support indicated in the
illustrations (or similar).
It should be assembled as follows:
• This option comes in four, unassembled
parts, together with the corresponding
screws and shock absorbers. They must
be joined two by two.
• Screw the brackets to the wall according
to the measurements.
Screws
Installazione dell'unità
L'unità esterna può essere appesa a una
parete o collocata a terra. In entrambi i casi
assicurarsi che l'unità sia livellata. Si
consiglia l'uso di ammortizzatori in modo da
ridurre la trasmissione delle vibrazioni.
Installazione a una parete esterna
Questo tipo di installazione richiede
l’utilizzo di staffe di supporto (accessorio)
come mostrato nelle figure.
Tali staffe
devono essere montate nel modo seguente:
• Si tratta di un accessorio composto da
quattro elementi smontati con relative viti.
Gli elementi devono essere uniti a due a
due.
• Avvitare gli elementi alla parete seguendo
le misure.
Viti
• Inspect shipment. Inspect the unit. If it is
damaged, or if the shipment is incomple-
te, file a claim immediately with the
shipping company.
• Check that the local power supply agrees
with the specification on the unit
nameplate.
Siting the unit
The following precautions should be
observed for correct installation of the
indoor unit:
• Do not install the unit near a source of
heat, steam or flammable gas.
• Do not install the unit where a strong wind
blows or where it is very dusty.
• Leave the clearances for unobstructed air
flow.
• Assicurarsi che l’unità non abbia subito
danni durante il trasporto. Controllare che
non vi siano parti mancanti. In questo
caso, fate immediatamente reclamo alla
Società responsabile della spedizione.
• Assicuratevi che le caratteristiche della
alimentazione elettrica siano conformi con
i dati elettrici sulla targa caratteristiche
dell’unità.
Posizionamento
È necessario osservare le seguenti
precauzioni per una corretta installazione
dell’unità interna:
• Non installare l’unità vicino ad una fonte
di calore, vapore o gas infiammabile.
• Non installare l’unità in luogo troppo
ventilato o polveroso.
• Lasciare degli spazi come mostrato in
figura.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrier 38MCJ 334 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrier 38MCJ 334 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info