616977
17
Zoom out
Zoom in
Previous page
1/21
Next page
30 31
Cleaning with Water
The shaving head of your shaver is easily cleaned under running
water.
1. Simply hold the shaver with the cutting blades pointing down at
a slant. This reduces the risk of water penetrating the inside of
the shaver.
The water temperature should not be above 70°C.
2. If you prefer to clean under running water, you can also use a few drops
of standard liquid soap to help. If you keep the appliance running while
rinsing, cleaning effect is more intensive.
CAUTION! The housing may be cleaned wet;
however, the shaver must not be submerged in water!
3. Allow the shaver to dry before replacing the shaving head and the
protective cap.
4. Just grip the shaving head at the side and press downwards until the
attachment lugs snap into place.
CAUTION: Do not use excessive force and do not press on the
shaving foil!
NOTE: If you use warm water to frequently clean the device, we recommend
regular application of a few drops of sewing machine oil to the long-hair
trimmer and the two cutting blades. Wipe off excess of oil with a cloth. Only
use acid-free oil, e.g. sewing machine oil.
07. Replacement Parts
Cutting elements are subject to natural wear and excluded from the warranty.
For optimal shaving a replacement in good time is essential.
You are able to reorder the following replacement parts:
Set consists of 3-fold shaving system with shaving foils & integrated long
hair trimmer and 2 cutting blades.
Recommended Replacement Intervals
We highly recommend to replace shaving system annually in order to guar-
antee an optimal cutting performance.
Since both parts become adjusted to one another over time, we recommend
replacing both at the same time (shaving head + foil + cutting blades).
The replacement parts can be ordered via the Service Centre.
Replacing Parts
1. Take off the protective cap.
2. Press the release buttons for the shaving head and remove it.
3. Grasp the old cutter blades at the ends, holding them between your
thumb and index finger. Carefully remove them from the shaver.
4. Grasp the new shaving blades at both ends between your thumb and
index finger and insert them into the white holding device. Briefly push
the cutting blades down until they lock in place with an audible click.
5. Grasp the shaving foil frame at its bracket and remove it from the shaving
head frame.
6. Insert the new shaving foil frame into the shaving head frame.
When inserting the shaving foil frame, make sure that the bracket
of the shaving foil frame is positioned opposite the recess of the
shaving head frame. Carefully push the shaving foil frame into the
shaving head frame until it locks in place with an audible click.
7. Reattach the shaving head to the shaver. When attaching the shaving
head, make sure that the recess of the shaving head frame points
to the long hair trimmer on the rear. Carefully push the shaving head
onto the shaver until it locks in place with an audible click.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrera 9113110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrera 9113110 in the language / languages: English, German as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info