616977
16
Zoom out
Zoom in
Previous page
1/21
Next page
28 29
Trimming Long Hair
Use the hair trimmer on the rear of the shaver to shorten beard and sideburns.
1. Take off the protective cap.
2. Push the hair trimmer upward.
3. Use the on / off switch
;
(4) to switch on the shaver.
4. After use, switch off the shaver, push the hair trimmer into its basic
position and clean the shaver ( 06. Cleaning and Care).
Three-day stubble shave
1. You can use the 3-day stubble attachment (7) to trim your beard to a hair
length of 3 mm.
2. Place the beard attachment onto the shaving head so that it is firmly
attached to it.
3. Trim your beard as you would normally do when shaving.
NOTES:
Observe that the 3-day stubble attachment is intended only to limit the
beard hair growth to a length of 3 mm, and that it is not designed to trim
longer hair to 3 mm.
When using the 3-day stubble attachment, the direct contact of the shaving
foil to the skin is lost. Consequently, the shaving system is no longer naturally
“greased” by sebum.
4. To ensure constant shaving performance, apply a drop of blade or sewing
machine oil after wet cleaning. See section “Cleaning with Water”.
06. Cleaning and Care
DANGER!
Remove the wall power supply from the power point before
cleaning the shaver.
Never submerge the entire shaver in water.
Dry Cleaning
WARNING!
Always switch off the shaver before cleaning it.
CAUTION! Risk of material damage
Do not use any harsh or abrasive cleaning agents.
Do not remove the shaving foil from the shaving foil frame
and do not clean it with the brush.
The cutting blades must not be removed for cleaning purposes.
The springs located underneath the cutting blades might jump out and
get lost. Remove the cutting blades for replacement purposes only (see
“Replacing Parts“, page 31).
NOTE: Clean the shaver after every use to warranty optimal results.
1. Press in the two lateral unlocking buttons (3) at the same time and
remove the shaving head (2) off the appliance.
2. Knock the blade head on a flat surface and blow it out.
3. Clean the cutting blades with the cleaning brush.
NOTE!
Cutting foil can be removed carefully from
the blade head for cleaning (see Fig.
).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrera 9113110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrera 9113110 in the language / languages: English, German as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info