616839

Carrera 622 Manual

16
Zoom out
Zoom in
Previous page
1/44
Next page
32 33GBGB
To remove the variable attachment comb, press the cutting length
adjustment button, fully extend the variable attachment comb and
pull it off.
Clipping with the variable attachment combs
Using the variable attachment combs, you can vary the cutting
lengths in 6 steps each. The cutting lengths of the variable attach-
ment comb
22
are 4/7/10/13/16/19 mm; those of the variable
attachment comb
23
are 21 / 24 / 27 / 30 / 33 / 36 mm.
NOTE: The cutting lengths can only be achieved
when you position the appliance with the surface
of the comb (see fig.).
The fine adjustment must be set to 0.8mm –
slide switch in upper position.
Clipping without the variable attachment comb
If you want to cut your hair to a very short length without using the
variable attachment comb, the cutting length can be set between
0.8 and 2 mm using the slide switch for the fine adjustment.
NOTE: The cutting lengths can only be achieved
when you position the appliance with the short
front cutting surface – relatively steep (see fig.).
Thinning your hair using the thinning attachment
Use the comb attachment with thinning function
23
to thin your hair.
NOTE: For thinning your hair, leave the 2mm fine adjustment unchanged.
Move the hair clipper with the cutting surface towards the hair.
The thinning comb must not be placed on the scalp.
08. CLEANING AND CARE
DANGER!
Remove the wall power supply from the socket before cleaning
the device.
WARNING!
Always switch off the device before cleaning it.
CAUTION!
Do not use any harsh or abrasive cleaning agents.
NOTE: Clean and oil the device after every use.
Remove the variable attachment comb. Rinse the variable attachment
comb with water and let it dry before reattaching it to the device.
Wipe down the housing of the device with a damp cloth.
Cleaning and oiling the shaving unit
1. Remove the shaving unit from the appliance by pressing it with the
thumb towards the rear (see fig. C).
2. Use the provided brush to remove the hair remnants from the
shaving unit.
3. The shaving unit can be cleaned under running water. Allow it to
dry well before reattaching it.
4. Apply a few drops of oil onto the cutting edge of the shaving unit.
Use a soft cloth to wipe off the excess oil, if necessary. Only use
acid-free oil such as sewing machine oil.
5. Carefully press the shaving unit from the rear onto the device until
it locks into place.
09. STORAGE
DANGER! Remove the mains plug from the device. Do not wrap
the cable around the device (Danger! Risk of cable break!).
Keep the device in a dry, dust-free room.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrera 622 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrera 622 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 8,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info