616839
15
Zoom out
Zoom in
Previous page
1/44
Next page
30 31GBGB
Charging
1. Connect the USB plug
11
to the USB female connector
12
and the
5V plug
14
to the appliance.
2. Connect the mains adapter to an easily accessible wall socket.
3. Observe the indicator lights on the hair clipper (see table).
WARNING! Always observe the voltage and power (mA) data
stated on the type plate of the mains adapter. Never use exter-
nal power sources strongly deviating from these data.
Symbol Meaning
% display
Battery operation
Battery capacity low –
recharging
Charging or mains operation
Fully charged at the mains
Travel lock is active
06. TRAVEL LOCK
It is easy to prevent the hair clipper from being accidentally switched on,
e.g. when travelling.
NOTE: The travel lock function will be deactivated automatically when
the charging process starts.
Activating the travel lock
1. Press and hold the on/off switch
4
for more than 5 seconds. The
switch of the hair clipper is locked and the appliance switches off.
A padlock symbol flashes on the LCD display.
Check whether the travel lock is activated by briefly pressing the
on/off switch
4
(for less than 5 seconds). If the travel lock is active,
the padlock symbol is shown on the display.
2. The on/off switch is temporarily without function; accidental
activation of the appliance and discharging of the batteries are
prevented.
Deactivating the travel lock
1. Press and hold the on/off switch
4
for more than 5 seconds; the
travel lock is deactivated and the hair clipper switched on.
2. The travel lock will also be deactivated by connecting the hair clip-
per to the mains.
07. OPERATION
Regardless of the state of charge of the batteries, mains operation of
the appliance is always possible using the provided mains adapter
only.
1. For mains operation connect the USB plug
11
to the USB female
connector
12
and the 5V plug
14
to the appliance.
2. Connect the mains adapter to an easily accessible wall socket.
3. Use the on/off switch
4
to switch on the appliance.
4. Press the on/off switch
4
to switch off the appliance.
Using the variable attachment comb
WARNING! Switch off the appliance before attaching the vari-
able attachment comb.
To attach the variable attachment comb, carefully push the locking
mechanism of the variable attachment comb
10
into the central
guide groove of the appliance; at the same time, press the cutting
length adjustment button
20
on the back of the comb attachment
and set the desired cutting length. The selected cutting length is
shown on the display (see fig. B)
19
.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrera 622 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrera 622 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 8,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info