551014

Carrera 501006 Spider Fox Manual

16
Zoom out
Zoom in
Previous page
1/116
Next page
16
T
1
T
2
T
3
T
4
0%
25%
50%
75%
4
R
L
6
2
+
‒
3
5
+
‒
RL
‒
+
1
RL
R
L
+
‒
‒
+
100%
In case you don´t know the control functions of your Carrera RC helicopter yet,
please take some minutes before the first flight in or to make yourself familiar
with them. The descriptions left or right refer to the view out of the cockpit
(pilote´s view).
With the throttle being at minimum posi-
tion and the trim of throttle in medium or
lower position, the rotor blades are not
going to revolve. Push the throttle up to
increase the rotational speed of the
main rotor blades. Increase the rota-
tional speed of the main rotor blades
and the model will start to ascend.
If you push down the throttle and thus
reduce the rotational speed of the main
rotor blades the helicopter will descend.
When the model has lifted off the
ground you can get it into stationary
hovering without abrupt ascending or
descending by carefully moving the
throttle upwards and downwards.
Move the left lever (tail) to the left and
the helicopter´s nose turns (yaws)
round the main rotor´s axis in a circle to
the left. Move the left lever (tail) to the
right and the helicopter´s nose turns
(yaws) round the main rotor´s axis in a
circle to the right.
Use the trimmer for tail until you have
reached a stable neutral position of the
helicopter when hovering, without
moving the left lever (tail).
The forward-/backward lever controls
the helicopter´s pitch forward and back-
ward. When shifting the lever forward
the nose of the helicopter will move
downwards and the helicopter will fly
forward. When shifting the forward-/
backward lever backward the helicopter
will move backwards and the helicopter
Controlling the helicopter
Sections / indicator values T
1-4
Throttle curve
Rotor speed
Warning: altering the indicated values
under menu points T1, T2, T3 and T4
is only recommended to be carried out
by experienced hobby-pilots!
In the setting menu, select the menu point
T
1
, T
2
, T
3
or T
4
. By pressing the „SEL“
button, you confirm selection of the menu
point T
1
, T
2
, T
3
or T
4
. The indicator value to
the right alongside the menu point T
1
, T
2
,
T
3
or T
4
begins to flash. You can now alter
the indicated value by using the „UP“ or
„DN“ buttons.
The standard distribution is T1 = 25 %,
T2 = 50 %, T3 = 75 %, T4 = 100 %.
By altering the respective values, the
response behaviour of the throttle is
altered. You confirm the indicated value by
pressing the „SEL“ button again. Finally, to
confirm the settings press on the menu
button again.
Menu-point: T1-4 - Throttle curve
In the setting menu, select the menu point
„C“. By pressing the „SEL“ button, you
confirm selection of the menu point „C“.
The indicator value to the right alongside
the menu point „C“ begins to flash. You
can now alter the indicated value by using
the „UP“ or „DN“ buttons. The greater the
indicated value, the more the model will bank to the right the value can lie between 0
and 100. You confirm the indicated value by pressing the „SEL“ button again. Finally,
to confirm the settings press on the menu button again.
Menu-point: C - right banking
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carrera 501006 Spider Fox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carrera 501006 Spider Fox in the language / languages: All languages as an attachment in your email.

The manual is 5,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Carrera 501006 Spider Fox

Carrera 501006 Spider Fox Additional guide - English, German, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info