792902

Carina Classic II Manual

69
Zoom out
Zoom in
Previous page
1/116
Next page
68
1. Install the darning plate.
Change presser foot to button-sew-
on foot.
Position the work under the foot.
Place the button on the marked
position and lower the foot.
Set the stitch selector dial on " "
and sew a few securing stitches.
Set the stitch selector dial on zig-
zag stitch " " and adjust the stitch
width to 3 - 5 according to the
distance between the two holes of
the button. Turn the handwheel to
check if the needle goes into the
right and left hole of the button
without any obstruction. Slowly
sew on the button with about 10
stitches.
Select stitch " " and finish the
sewing on button with sewing a
few securing stitches.
. If a shank is required, place a
darning needle on top of the button
and sew.
. For buttons with 4 holes, sew
through the front two holes first,
push work forward and then sew
through the back two holes as
described.
-
-
-
2
3
1. Vsa
Zaměňte přítlačnou patku za patku
na přišívání knoflíků. Látku k šití
položte pod patku.
Knoflík položte na požadované
místo a spusťte přítlačnou patku.
- Volič stehů otočte na " " a ušijte
několik zajišťovacích stehů.
- Vyberte klikatý steh a nastavte
šířku stehu na 3 až 5 podle
vzdálenosti knoflíkových dírek.
Otáčejte ručním ovládacím kolem,
čímž zajistíte, že jehla bez
překážky zasáhne obě knoflíkové
dírky. Knoflík přišijte 10 pomalými
stehy.
- Vyberte " " a ukončete přišívání
knoflíku několika zajišťovacími
stehy.
2. Pokud je potřeba udělat krček,
položte na knoflík látací jehlu a
šijte.
ďte vyšívací a stehovací
destičku.
3. U knoflíků se čtyřmi dírkami ušijte
nejprve dvě přední dírky, šitý
výrobek posuňte dopředu a potom
přišijte dvě zadní dírky.
" "
Přišívání knoflíků
Couture de boutons
Sewing on buttons
FR
CZ
EN
1. Placer la plaquette de reprisage sur
la plaque aiguille.
Mettez en place le pied bouton.
Enlever le pied-de-biche zigzag et
le remplacer par le pied pour la
pose des boutons. Glisser
l'ouvrage sous le pied-de-biche,
placer le bouton sur le repère et
abaisser le pied-de-biche.
Mettre le bouton de choix de points
sur " " et coudre quelques points
pour rabattre.
Sélectionner le point zigzag " " et
mettre la grandeur de points à 3-5,
selon la distance des trous du
bouton. Tourner la manivelle afin
de vérifier que l'aiguille passe bien
dans les trous du bouton. Coudre
le bouton doucement par 10
points.
Sélectionner " " et finir la couture
du bouton par quelques points pour
rabattre.
.
3.
-
-
-
2Glisser une aiguille à repriser sur le
bouton pour former une tige.
Pour les boutons à quatre trous, on
coudra tout d'abord les deux
premiers trous, tirer ensuite
l'ouvrage vers soi et coudre les
deux trous suivants
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carina Classic II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carina Classic II in the language / languages: English, German, French as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info