792902

Carina Classic II Manual

67
Zoom out
Zoom in
Previous page
1/116
Next page
66
1. Install the darning plate.
Change presser foot to button-sew-on
foot.
Position the work under the foot.
Place the button on the marked
position and lower the foot.
Set the stitch selector dial on " " and
sew a few securing stitches.
Select zig-zag stitch with a stitch width
according to the distance between the
two holes of the button. Turn the
handwheel to check if the needle
goes into the right and left hole of the
button without any obstruction. Slowly
sew on the button with about 10
stitches.
Select stitch " " and finish the
sewing on button by sewing a few
securing stitches.
. If a shank is required, place a darning
needle on top of the button and sew.
. For buttons with 4 holes, sew through
the front two holes first, push work
forward and then sew through the back
two holes as described.
-
-
-
2
3
Please note:
You will find "S2" marking on the stitch
length dial of model
additional.
Carina Power &
Stretch II
1. Placer la plaquette de reprisage sur la
plaque aiguille.
Mettez en place le pied bouton.
Enlever le pied-de-biche zigzag et le
remplacer par le pied pour la pose des
boutons. Glisser l'ouvrage sous le pied-
de-biche, placer le bouton sur le repère
et abaisser le pied-de-biche.
- Mettre le bouton de choix de points
sur " " et coudre quelques points
pour rabattre.
Sélectionner le point zigzag et ajuster
la grandeur du point selon la distance
des trous du bouton. Tourner la
manivelle pour vérifier que l'aiguille
passe bien dans les trous du bouton.
Coudre le bouton doucement par 10
points.
- Sélectionner " " et finir la couture du
bouton par quelques points pour
rabattre.
2. Glisser une aiguille à repriser sur le
bouton pour former une tige.
3. Pour les boutons à quatre trous, on
coudra tout d'abord les deux premiers
trous, tirer ensuite l'ouvrage vers soi et
coudre les deux trous suivants
-
Attention:
Dans le model Carina Power & Stretch II il
y a "S2" sur le bouton de réglage de la
longeur du point en plus.
1. Vsa
- Volič stehů otočte na " " a ušijte
několik zajišťovacích stehů.
- Vyberte klikatý steh a nastavte šířku
stehu podle vzdálenosti knoflíkových
dírek. Otáčejte ručním ovládacím
kolem, čímž zajistíte, že jehla bez
překážky zasáhne obě knoflíkové
dírky. Knoflík přišijte 10 pomalými
stehy.
- Vyberte " " a ukončete přišívání
knoflíku několika zajišťovacími stehy.
2. Pokud je potřeba udělat krček, položte
na knoflík látací jehlu a šijte.
Model je na
tlačítku pro délku steh se navíc nachází
poloha "S2".
ďte vyšívací a stehovací destičku.
Zaměňte přítlačnou patku za patku na
přišívání knoflíků. Látku k šití položte
pod patku.
Knoflík položte na požadované místo a
spusťte přítlačnou patku.
3. U knoflíků se čtyřmi dírkami ušijte
nejprve dvě přední dírky, šitý výrobek
posuňte dopředu a potom přišijte dvě
zadní dírky.
Upozorňujeme:
Carina Power & Stretch II
Přišívání knoflíků
Couture de boutons
Sewing on buttons
FR
CZ
EN
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carina Classic II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carina Classic II in the language / languages: English, German, French as an attachment in your email.

The manual is 1.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info