480779
5
Zoom out
Zoom in
Previous page
1/16
Next page
English
PRIMARY BUDDY PAIRING (requires two
scala rider Q2
pro
headsets*)
1. If either headset is turned OFF, turn it ON by pressing and holding
the CTRL Button until the Blue Light ashes three times.
2. Make sure that both headsets are now ashing slowly in Blue.
3. Pick up one headset and simultaneously press and hold the
CTRL Button and MC Button for at least six seconds until the
Red Light begins flashing rapidly, indicating it is in Intercom
Pairing mode.
4. Repeat Step 3 again for the second scala rider Q2
pro
headset.
Both headsets should now be ashing rapidly in Red.
5. Within a few seconds, both headsets will show a solid Red
light for two seconds, and then begin flashing slowly in Blue.
NOTE: If the Pairing process is not completed within two
minutes the headset will return to Standby mode.
* Same process is applicable also for pairing with the Q2, i.e. the predecessor
of the Q2 PRO.
SECONDARY BUDDY PAIRING (requires three
scala rider Q2
pro
headsets*)
Once you have paired your scala rider Q2
pro
to the Primary
Buddy headset, repeat the procedure above to pair your
scala rider Q2
pro
to the Secondary Buddy headset.
NOTE: Your scala rider Q2
pro
is able to communicate with either the Primary
Buddy or the Secondary Buddy. The Primary Buddy and Secondary Buddy are
not able to communicate directly via Intercom.
NOTE: If the Pairing process is not completed within two
minutes the headset will return to Standby mode.
* Same process is applicable also for pairing with the Q2, i.e. the predecessor
of the Q2 PRO.
SET UP FOR RIDER-TO-PASSENGER
INTERCOM: PAIRING
There are two ways that the scala rider Q2
pro
can be used for
Driver-to-Passenger communication.
A. Both Rider and Passenger are using scala rider Q2
pro
headsets.
To Pair the two headsets, follow the Steps listed in the section
above titled PRIMARY BUDDY PAIRING (2 bikers).
B. The Rider is using a scala rider Q2
pro
and the Passenger is
using an earlier scala rider headset (i.e. a scala rider Solo™,
a scala rider FM™, a scala rider TeamSet™ Driver unit or
TeamSet™
pro
headset).
To Pair the two headsets:
1. Starting with the earlier scala rider headset turned OFF, press
and hold the CTRL button until the Red/Blue lights begin
rapidly alternating.
2. Starting with the scala rider Q2
pro
turned ON,
simultaneously press and hold the CTRL Button and MC
Button for six seconds until the Red light begins ashing
rapidly, indicating it is in Intercom Pairing mode.
3. Within a few seconds, the scala rider Q2
pro
will show a solid Red
light for two seconds, and then beginashing slowly in Blue.
NOTES: If the Pairing process is not completed within two minutes
the headset will return to Standby mode.
English
5
scala rider
®
Q2
pro
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider Q2 Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider Q2 Pro in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider Q2 Pro

Cardo Scala rider Q2 Pro User Manual - German - 15 pages

Cardo Scala rider Q2 Pro User Manual - Dutch - 15 pages

Cardo Scala rider Q2 Pro User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info