480783
12
Zoom out
Zoom in
Previous page
1/18
Next page
5.4 BUSY SIGNAL
When attempting to establish an Intercom call with another device
that is already busy, a “busy” signal will be heard. The scala rider is
busy while on a phone call, intercom call with Channels “A” and B”,
1+8 intercom call or Click-to-Link call.
5.5 RECEIVING INTERCOM CALLS
If a paired unit tries calling you via Intercom, the call will begin
almost instantly.
5.6 GROUP SIGNAL
Send an instant message to all paired scala rider G9 / G9x and
cardo SHO-1 units within a range of up to 350 m. The
recipients will hear a “Signal!” voice announcement. To reach a
maximum number of riders, the message is automatically
forwarded to all paired units within the recipients range. In this
manner the total range is extended to up to 1 km.
Send a Group Signal
Double tap u
The transfer of wireless signals is subject to multiple external factors.
Therefore, users may use but should not rely on the Group Signal for
emergency purposes.
6. PAIRING AND USING A MOBILE PHONE,
GPS OR MP3 PLAYER
To use a Bluetooth device with your scala rider you must rst pair
them. Once paired, they will automatically recognize each other
whenever they are within range (10m / 33ft).
Your unit has two Bluetooth channels for connection to mobile
phones, GPS devices and music players with A2DP.
6.1 PAIRING BLUETOOTH CHANNELS 1 AND 2
1. Make sure Bluetooth is enabled on your phone/GPS/MP3 player.
2. Check the unit is in Standby (single BLUE ash every 3 seconds).
3. To pair Bluetooth Channel 1 – press
p
for at least 5 seconds
until the RED and BLUE LEDs begin rapidly alternating.
To pair Bluetooth Channel 2 – press + for at least 5 seconds
until the RED and BLUE LEDs begin rapidly alternating.
To pair a GPS, when LEDs begin rapidly alternating, tap .
4. Search for Bluetooth devices on your phone/GPS/MP3 player by
following the device’s instructions.
5. After a few seconds the device will list “scala rider G9”. Select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. The device will conrm that pairing has succeeded and the LED
will begin ashing Blue, once every 3 seconds.
8. If pairing is not completed within 2 minutes, the unit will return
to Standby mode.
IMPORTANT!
If you have paired 2 dierent mobile phones directly to your
scala rider G9, you will need to set one as default for making calls.
If your GPS supports it, you can pair the second mobile phone
directly to the GPS and then pair the GPS to your scala rider G9,
and so connect both mobile phones and the GPS to your
scala rider G9.
12
| scala rider
®
G9 / G9 PowerSet
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G9 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G9

Cardo Scala rider G9 User Manual - German - 22 pages

Cardo Scala rider G9 User Manual - Dutch - 30 pages

Cardo Scala rider G9 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info