480783
10
Zoom out
Zoom in
Previous page
1/18
Next page
5.2a PAIRING INTERCOM CHANNELS “A” AND “B”
Pairing a channel will replace any existing paired device on that
Channel with the newly paired device.
If you have purchased the G9 PowerSet, both units are factory-
paired and congured to communicate via Channel “A”. If for
any reason you have to pair them again, OR if you wish to pair a
dierent unit to make Intercom calls, proceed as follows:
There are two ways to pair Channels “A” and “B”:
OPTION 1: Flash-Pairing™ (with other G9 or G9x models)
See note in 5.1b
OPTION 2: Standard Channel A / B Pairing (with all models)
1. Check that all units are in Standby.
2. To pair Intercom Channel A – press a for at least 5 seconds
until the RED LED begins ashing rapidly.
To pair Intercom Channel B – press b for at least 5 seconds
until the BLUE LED begins ashing rapidly.
3. Enter Intercom Pairing mode on the second unit following its
user manual. Both units will now be in Intercom Pairing mode.
4. After a few seconds, both units will show a solid LED for 2 seconds,
indicating that they are paired and ready to use.
5. If Pairing is not completed within two minutes, the units will
return to Standby mode.
5.2b CALLING INTERCOM CHANNELS “A” AND B”
There are two ways to start an intercom call with Channels “A”
and B”:
OPTION 1: Voice Connect (VOX)
Speak any word loudly into the microphone. When you hear the
Voice Command tone, say “Call Intercom” to start an intercom call
with “A” and/or “B” (subject to who is present)
VOX Intercom call with only “A” or “B” will end automatically after
30 seconds of silence.
OPTION 2: Manual Mode
Use this to start an Intercom call with either:
• Channel “A”: Tap • Channel “B”: Tap
To end a call tap
or
again.
If you are already in an Intercom call with “A” or “B”, you can add
another rider (“A” or “B”) by tapping the other channel button, or
another rider can join the intercom call in the same way.
THREE-WAY INTERCOM
Use Channel “B”
Use Channel “A”
Rider 2
Rider 3
Rider 1
Pairing
Rider “1” is paired to Rider “2” and also to Rider “3”.
1. Rider 1 pairs to Rider 2 using Channel “A” (see 5.2a).
2. Rider 1 pairs to Rider 3 using Channel “B” (see 5.2a).
10
| scala rider
®
G9 / G9 PowerSet
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G9 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G9

Cardo Scala rider G9 User Manual - German - 22 pages

Cardo Scala rider G9 User Manual - Dutch - 30 pages

Cardo Scala rider G9 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info