480782
6
Zoom out
Zoom in
Previous page
1/27
Next page
For example, incoming mobile phone calls will interrupt ongoing
Intercom calls, while incoming intercom calls will interrupt the audio
from the built-in FM Radio etc.
Higher Priority
1. Mobile Phone audio or GPS instructions (device
specic)
2. Intercom
3. A2DP audio source
4. FM Radio (built-in)
5. Auxiliary Line-In Port (for corded connection
e.g. MP3 players).
Lower Priority
4.4 SOFTWARE UPGRADES AND SETTINGS
To make the most of your G4, make sure that it is
running the latest software. To download the latest
software updates and take advantage of customizing
settings via the computer, register online at:
www.cardosystems.com/download/softwareupgrade and have your
product serial number ready.
After downloading the Cardo Upgrades program, use the USB cable
included in the retail box to connect the G4 to your computer.
Once connected to your computer, you will easily be able to customize
the settings on your G4 following the on-screen instructions.
Future software upgrades and program patches will ensure the software
of your G4 is kept up-to-date and will include additional features, status
announcements and other valuable functions.
Please note that until further notice, upgrades will only be available for
Windows® based PCs running Windows XP, Vistaor Windows 7™
operating systems.
4.5 RESETTING THE G4
If the G4 fails to respond despite repeated attempts, you can reset it
by simply charging it. After approximately 10 seconds, remove the G4
from the charger and turn it on again. Your G4 should now respond
as expected.
5. GETTING STARTED
5.1 MOUNTING THE G4 ON A HELMET
The Helmet clamp that includes your microphone and speakers
must rst be mounted on the helmet. Once mounted, the G4 unit
can be attached or detached from the clamp at any time (sec. 5.4).
There are two methods that can be used to attach the clamp to the
helmet:
Standard Method: Recommended for most helmet types.
Glue Plate Method: Recommended for helmets
to which the standard method cannot be applied,
using the Glue Plate included in the box.
Glue Plate
Standard Method: Fastening the Clamp to the Helmet
1. Use the enclosed Allen Wrench to loosen
the two screws on the Back Plate.
2. Slide the Back Plate between the internal
padding and the external shell of the helmet.
3. Adjust the clamp’s location so that the
microphone is located in front of the center of
your mouth, and then tighten the screws. You
may need to reposition the Clamp repeatedly
until you identify the best spot.
If you have purchased a helmet clamp version with
the corded microphone, please refer to section 5.2.
Glue Plate Method:
You have the option to glue the Helmet Clamp onto your helmet
when the above standard method cannot be used, or if you prefer to
secure the Helmet Clamp with adhesive glue.
Caution: This process can be done only once!
6
scala rider
®
G4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardo Scala rider G4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardo Scala rider G4 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardo Scala rider G4

Cardo Scala rider G4 User Manual - German - 30 pages

Cardo Scala rider G4 User Manual - Dutch - 29 pages

Cardo Scala rider G4 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info