691091
14
Zoom out
Zoom in
Previous page
1/64
Next page
TX40e
14
Problem: E9 appears on the display after you have used the treadmill for a few minutes.
Solution: 1. The upper and lower control cables are not correctly connected. In order
to solve the problem, please check the cable routing (circuit).
2. Please contact your contract partner and ask for technical customer service.
Problem: The treadmill automatically stops during training.
Solution: The treadmill does not record your steps, because it stopped running or
because the user weight is too low to detect the steps, in particular if an incline level
is set. One option is to go to the personal settings and turn o the INTELLI-GUARD
function (see 34).
! Warning: This releases the INTELLI-GUARD function, however, though it may
be necessary based on dierent variables.
Technical mode
Personal setting Information on the screen
Hold ENTER/MODE and then SPEED UP for three seconds to get
to the technical mode. First the software version will appear.
Then press ENTER/MODE to get to the personal settings or show
the factory settings.
200 ENG MODE
Setting the measurements - metric (Si) or English (E). Press SPEED
UP or DOWN to change between them. Press ENTER/MODE to
conrm the setting and to get to the next setting.
En or Si
Turn the INTELLI-GUARD on/o. INTELLI-GUARD stops the
equipment automatically if no steps are detected on the tread-
mill. Press SPEED UP or DOWN to change it. Press ENTER/MODE
to conrm the setting and to get to the next setting.
I-G
On or O
Setting the pause time. Here you can set the time for which the
treadmill should stop before changing to the automatic settings.
The options are 90, 180 or 300 seconds until the console resets.
Press SPEED UP or DOWN to change it. Press ENTER/MODE to
conrm the setting and get to the next setting.
PAUSE TIME
90 or 180 or 300
Turning the acoustic alarm on/o !WARNING: The acoustic alarm
was set by the manufacturer in order to warn users when the
treadmill starts or the speed changes. The user may turn o the
alarm at one‘s own risk.
BZ On or OFF
Set up treadmill. Start speed after the PAUSE button was pressed.
0 indicates that the treadmill will start at the lowest speed. 1
indicates that the treadmill will start at the speed it had before
the PAUSE button was pressed. Press SPEED UP or DOWN to
change it. Press ENTER/MODE to conrm the setting and to get
to the next setting.
BZ On or OFF
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Cardiostrong TX40e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Cardiostrong TX40e in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Cardiostrong TX40e

Cardiostrong TX40e User Manual - German - 67 pages

Cardiostrong TX40e User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info