816489
15
Zoom out
Zoom in
Previous page
1/33
Next page
RVZ-500 Operation manual
page 15 03/2021
5. Maintenance
The basic activities of maintenance which are
described in this Manual can be carried out by
the designated operator.
Repairs and adjustments beyond the extent of
this Manual should be committed to an
authorized service agent.
NOTE:
During the warranty period, no interventions to
the engine are allowed, except for prescribed
maintenance.
5.1. Maintenance of the Engine
- see enclosed Engine Operation Manual
5.2. Tensioning of the Drive Belts
check regularly tensioning of the drive belts that
drive the cutting disc. Deflection of the belts
under finger pressure should be about 2 cm.
To tension the belts, proceed as follows:
loosen 4 bolts which fasten the engine to
the base plate
turn the tensioning screw to tension the
belts
re-tighten the fastening bolts
When replacing the belts, use all belts of the
same type and dimension.
NOTE! Do not over-tension the belts!
5.3. Inspection of Bolted Connections
It is recommended to inspect the bolted
connections daily before work.
5.4. Adjustment of Engine Speed
If in case of engine replacement or repair, it is
necessary to adjust engine speed. Proceed as
follows:
Engine speed can be measured either by contact
or non-contact revolution meter. If the contact
one is used, remove the belt cover first.
The engine speed should be 3600 RPM.
The disc spindle speed should be: 2800 RPM
NEVER ADJUST HIGHER ENGINE
SPEED THAN SPECIFIED!
(The engine could be damaged due to
excessive vibrations.)
The manufacturer shall not honor any
warranty claims arising from excessive speed
of the engine!
SPEED ADJUSTMENT SHOULD BE DONE
BY AN AUTHORIZED SERVICE AGENT
DURING THE WARRANTY PERIOD!
Fig. Basic groups of the cutter (see exploded views for details)
1= frame
2= drive system
3= undercarriage
4= push bar
5= depth control
6= water cooling system
7= pointer guide
9= accessories
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat VZ-500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat VZ-500 in the language / languages: English as an attachment in your email.

The manual is 1.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info