816482

Carat SL-1505 DUSTEC Manual

32
Zoom out
Zoom in
Previous page
1/84
Next page
32
GB
OPERATION
1. Adjust the groove width as desired.
2. Adjust the depth of cut.
3. Mark the intended cutting line.
4. Place the machine in position on the workpiece.
5. While it is still raised and the blades are not yet in contact with the workpiece, squeeze the trigger and
allow the machine to reach full speed.
6. Holding firmly with both hands, squeeze the plunge release lever and slowly lower the blades into the cut,
continuing until the depth stop is reached.Start at the top of the wall and pull the machine downwards.
Take care that the base remains firmly on the workpiece.
NOTE: While squeezing the plunge release lever, do not push down too hard on the main handle,
because that would cause the plunge release mechanism to bind, preventing it from releasing.
CAUTION: Take care not to cut in a curved line. This will likely shatter the diamond blades causing a
severe hazard.
7. When the cut is finished, raise the machine to the top of its stroke and allow the coasting blade to come
to a full stop before setting down.
Do not force the cut. Let the saw do the cutting at the rate of speed permitted by the type of cut and
workpiece.
SHARPENING DULL DIAMOND BLADES
If a lot of sparks are seen while cutting, this is a sign that the blade is becoming dull. To create better diamond
exposure (sharpen), make several cuts in a special sharpening stone for diamond blades or alternately use
calcareous sandstone.
MAINTENANCE
Every 50 hours of operation blow compressed air through the motor while running at no load to clean out
accumulated dust. (If operating in especially dusty conditions, perform this operation more often.)
KEEP TOOL CLEAN
All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could
possibly dissolve or otherwise damage the material. Wear safety glasses while using compressed air.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Carat SL-1505 DUSTEC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Carat SL-1505 DUSTEC in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 3.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info